acl/include/mbedtls/2.7.12/gcm.h
2023-02-17 16:16:57 +08:00

298 lines
12 KiB
C

/**
* \file gcm.h
*
* \brief Galois/Counter Mode (GCM) for 128-bit block ciphers, as defined
* in <em>D. McGrew, J. Viega, The Galois/Counter Mode of Operation
* (GCM), Natl. Inst. Stand. Technol.</em>
*
* For more information on GCM, see <em>NIST SP 800-38D: Recommendation for
* Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC</em>.
*
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_GCM_H
#define MBEDTLS_GCM_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "cipher.h"
#include <stdint.h>
#define MBEDTLS_GCM_ENCRYPT 1
#define MBEDTLS_GCM_DECRYPT 0
#define MBEDTLS_ERR_GCM_AUTH_FAILED -0x0012 /**< Authenticated decryption failed. */
#define MBEDTLS_ERR_GCM_HW_ACCEL_FAILED -0x0013 /**< GCM hardware accelerator failed. */
#define MBEDTLS_ERR_GCM_BAD_INPUT -0x0014 /**< Bad input parameters to function. */
#if !defined(MBEDTLS_GCM_ALT)
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief The GCM context structure.
*/
typedef struct {
mbedtls_cipher_context_t cipher_ctx; /*!< The cipher context used. */
uint64_t HL[16]; /*!< Precalculated HTable low. */
uint64_t HH[16]; /*!< Precalculated HTable high. */
uint64_t len; /*!< The total length of the encrypted data. */
uint64_t add_len; /*!< The total length of the additional data. */
unsigned char base_ectr[16]; /*!< The first ECTR for tag. */
unsigned char y[16]; /*!< The Y working value. */
unsigned char buf[16]; /*!< The buf working value. */
int mode; /*!< The operation to perform:
#MBEDTLS_GCM_ENCRYPT or
#MBEDTLS_GCM_DECRYPT. */
}
mbedtls_gcm_context;
/**
* \brief This function initializes the specified GCM context,
* to make references valid, and prepares the context
* for mbedtls_gcm_setkey() or mbedtls_gcm_free().
*
* The function does not bind the GCM context to a particular
* cipher, nor set the key. For this purpose, use
* mbedtls_gcm_setkey().
*
* \param ctx The GCM context to initialize.
*/
void mbedtls_gcm_init( mbedtls_gcm_context *ctx );
/**
* \brief This function associates a GCM context with a
* cipher algorithm and a key.
*
* \param ctx The GCM context to initialize.
* \param cipher The 128-bit block cipher to use.
* \param key The encryption key.
* \param keybits The key size in bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
* <li>256 bits</li></ul>
*
* \return \c 0 on success, or a cipher specific error code.
*/
int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx,
mbedtls_cipher_id_t cipher,
const unsigned char *key,
unsigned int keybits );
/**
* \brief This function performs GCM encryption or decryption of a buffer.
*
* \note For encryption, the output buffer can be the same as the input buffer.
* For decryption, the output buffer cannot be the same as input buffer.
* If the buffers overlap, the output buffer must trail at least 8 Bytes
* behind the input buffer.
*
* \warning When this function performs a decryption, it outputs the
* authentication tag and does not verify that the data is
* authentic. You should use this function to perform encryption
* only. For decryption, use mbedtls_gcm_auth_decrypt() instead.
*
* \param ctx The GCM context to use for encryption or decryption.
* \param mode The operation to perform:
* - #MBEDTLS_GCM_ENCRYPT to perform authenticated encryption.
* The ciphertext is written to \p output and the
* authentication tag is written to \p tag.
* - #MBEDTLS_GCM_DECRYPT to perform decryption.
* The plaintext is written to \p output and the
* authentication tag is written to \p tag.
* Note that this mode is not recommended, because it does
* not verify the authenticity of the data. For this reason,
* you should use mbedtls_gcm_auth_decrypt() instead of
* calling this function in decryption mode.
* \param length The length of the input data, which is equal to the length
* of the output data.
* \param iv The initialization vector.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data.
* \param add_len The length of the additional data.
* \param input The buffer holding the input data. Its size is \b length.
* \param output The buffer for holding the output data. It must have room
* for \b length bytes.
* \param tag_len The length of the tag to generate.
* \param tag The buffer for holding the tag.
*
* \return \c 0 if the encryption or decryption was performed
* successfully. Note that in #MBEDTLS_GCM_DECRYPT mode,
* this does not indicate that the data is authentic.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid.
* \return #MBEDTLS_ERR_GCM_HW_ACCEL_FAILED or a cipher-specific
* error code if the encryption or decryption failed.
*/
int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
int mode,
size_t length,
const unsigned char *iv,
size_t iv_len,
const unsigned char *add,
size_t add_len,
const unsigned char *input,
unsigned char *output,
size_t tag_len,
unsigned char *tag );
/**
* \brief This function performs a GCM authenticated decryption of a
* buffer.
*
* \note For decryption, the output buffer cannot be the same as input buffer.
* If the buffers overlap, the output buffer must trail at least 8 Bytes
* behind the input buffer.
*
* \param ctx The GCM context.
* \param length The length of the ciphertext to decrypt, which is also
* the length of the decrypted plaintext.
* \param iv The initialization vector.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data.
* \param add_len The length of the additional data.
* \param tag The buffer holding the tag to verify.
* \param tag_len The length of the tag to verify.
* \param input The buffer holding the ciphertext. Its size is \b length.
* \param output The buffer for holding the decrypted plaintext. It must
* have room for \b length bytes.
*
* \return \c 0 if successful and authenticated.
* \return #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid.
* \return #MBEDTLS_ERR_GCM_HW_ACCEL_FAILED or a cipher-specific
* error code if the decryption failed.
*/
int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
size_t length,
const unsigned char *iv,
size_t iv_len,
const unsigned char *add,
size_t add_len,
const unsigned char *tag,
size_t tag_len,
const unsigned char *input,
unsigned char *output );
/**
* \brief This function starts a GCM encryption or decryption
* operation.
*
* \param ctx The GCM context.
* \param mode The operation to perform: #MBEDTLS_GCM_ENCRYPT or
* #MBEDTLS_GCM_DECRYPT.
* \param iv The initialization vector.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data, or NULL if \p add_len is 0.
* \param add_len The length of the additional data. If 0, \p add is NULL.
*
* \return \c 0 on success.
*/
int mbedtls_gcm_starts( mbedtls_gcm_context *ctx,
int mode,
const unsigned char *iv,
size_t iv_len,
const unsigned char *add,
size_t add_len );
/**
* \brief This function feeds an input buffer into an ongoing GCM
* encryption or decryption operation.
*
* ` The function expects input to be a multiple of 16
* Bytes. Only the last call before calling
* mbedtls_gcm_finish() can be less than 16 Bytes.
*
* \note For decryption, the output buffer cannot be the same as input buffer.
* If the buffers overlap, the output buffer must trail at least 8 Bytes
* behind the input buffer.
*
* \param ctx The GCM context.
* \param length The length of the input data. This must be a multiple of 16 except in the last call before mbedtls_gcm_finish().
* \param input The buffer holding the input data.
* \param output The buffer for holding the output data.
*
* \return \c 0 on success, or #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
*/
int mbedtls_gcm_update( mbedtls_gcm_context *ctx,
size_t length,
const unsigned char *input,
unsigned char *output );
/**
* \brief This function finishes the GCM operation and generates
* the authentication tag.
*
* It wraps up the GCM stream, and generates the
* tag. The tag can have a maximum length of 16 Bytes.
*
* \param ctx The GCM context.
* \param tag The buffer for holding the tag.
* \param tag_len The length of the tag to generate. Must be at least four.
*
* \return \c 0 on success, or #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
*/
int mbedtls_gcm_finish( mbedtls_gcm_context *ctx,
unsigned char *tag,
size_t tag_len );
/**
* \brief This function clears a GCM context and the underlying
* cipher sub-context.
*
* \param ctx The GCM context to clear.
*/
void mbedtls_gcm_free( mbedtls_gcm_context *ctx );
#ifdef __cplusplus
}
#endif
#else /* !MBEDTLS_GCM_ALT */
#include "gcm_alt.h"
#endif /* !MBEDTLS_GCM_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief The GCM checkup routine.
*
* \return \c 0 on success, or \c 1 on failure.
*/
int mbedtls_gcm_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* gcm.h */