apisix/t/node/chash-balance.t

#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
use t::APISIX 'no_plan';

repeat_each(1);
log_level('info');
no_root_location();
worker_connections(1024);
no_shuffle();

run_tests();

__DATA__

=== TEST 1: set route(two upstream node)
--- config
    location /t {
        content_by_lua_block {
            local t = require("lib.test_admin").test
            local code, body = t('/apisix/admin/routes/1',
                 ngx.HTTP_PUT,
                 [[{
                    "uri": "/server_port",
                    "upstream": {
                        "key": "remote_addr",
                        "type": "chash",
                        "nodes": {
                            "127.0.0.1:1980": 1,
                            "127.0.0.1:1981": 1
                        }
                    }
                }]]
                )

            if code >= 300 then
                ngx.status = code
            end
            ngx.say(body)
        }
    }
--- request
GET /t
--- response_body
passed
--- no_error_log
[error]



=== TEST 2: hit routes
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port"

            local ports_count = {}
            for i = 1, 12 do
                local httpc = http.new()
                local res, err = httpc:request_uri(uri, {method = "GET"})
                if not res then
                    ngx.say(err)
                    return
                end
                ports_count[res.body] = (ports_count[res.body] or 0) + 1
            end

            local ports_arr = {}
            for port, count in pairs(ports_count) do
                table.insert(ports_arr, {port = port, count = count})
            end

            local function cmd(a, b)
                return a.port > b.port
            end
            table.sort(ports_arr, cmd)

            ngx.say(require("toolkit.json").encode(ports_arr))
            ngx.exit(200)
        }
    }
--- request
GET /t
--- response_body
[{"count":12,"port":"1980"}]
--- no_error_log
[error]



=== TEST 3: set route(three upstream node)
--- config
    location /t {
        content_by_lua_block {
            local t = require("lib.test_admin").test
            local code, body = t('/apisix/admin/routes/1',
                 ngx.HTTP_PUT,
                 [[{
                    "uri": "/server_port",
                    "upstream": {
                        "key": "remote_addr",
                        "type": "chash",
                        "nodes": {
                            "127.0.0.1:1980": 1,
                            "127.0.0.1:1981": 1,
                            "127.0.0.1:1982": 1
                        }
                    }
                }]]
                )

            if code >= 300 then
                ngx.status = code
            end
            ngx.say(body)
        }
    }
--- request
GET /t
--- response_body
passed
--- no_error_log
[error]



=== TEST 4: hit routes
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port"

            local ports_count = {}
            for i = 1, 12 do
                local httpc = http.new()
                local res, err = httpc:request_uri(uri, {method = "GET"})
                if not res then
                    ngx.say(err)
                    return
                end
                ports_count[res.body] = (ports_count[res.body] or 0) + 1
            end

            local ports_arr = {}
            for port, count in pairs(ports_count) do
                table.insert(ports_arr, {port = port, count = count})
            end

            local function cmd(a, b)
                return a.port > b.port
            end
            table.sort(ports_arr, cmd)

            ngx.say(require("toolkit.json").encode(ports_arr))
            ngx.exit(200)
        }
    }
--- request
GET /t
--- response_body
[{"count":12,"port":"1982"}]
--- no_error_log
[error]



=== TEST 5: set route(three upstream node)
--- config
    location /t {
        content_by_lua_block {
            local t = require("lib.test_admin").test
            local code, body = t('/apisix/admin/routes/1',
                 ngx.HTTP_PUT,
                 [[{
                    "uri": "/server_port",
                    "upstream": {
                        "key": "remote_addr",
                        "type": "chash",
                        "nodes": {
                            "127.0.0.1:1980": 1,
                            "127.0.0.1:1981": 0,
                            "127.0.0.1:1982": 0
                        }
                    }
                }]]
                )

            if code >= 300 then
                ngx.status = code
            end
            ngx.say(body)
        }
    }
--- request
GET /t
--- response_body
passed
--- no_error_log
[error]



=== TEST 6: hit routes
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port"

            local ports_count = {}
            for i = 1, 12 do
                local httpc = http.new()
                local res, err = httpc:request_uri(uri, {method = "GET"})
                if not res then
                    ngx.say(err)
                    return
                end
                ports_count[res.body] = (ports_count[res.body] or 0) + 1
            end

            local ports_arr = {}
            for port, count in pairs(ports_count) do
                table.insert(ports_arr, {port = port, count = count})
            end

            local function cmd(a, b)
                return a.port > b.port
            end
            table.sort(ports_arr, cmd)

            ngx.say(require("toolkit.json").encode(ports_arr))
            ngx.exit(200)
        }
    }
--- request
GET /t
--- response_body
[{"count":12,"port":"1980"}]
--- no_error_log
[error]



=== TEST 7 set route(three upstream node with querystring)
--- config
    location /t {
        content_by_lua_block {
            local t = require("lib.test_admin").test
            local code, body = t('/apisix/admin/routes/1',
                 ngx.HTTP_PUT,
                 [[{
                    "uri": "/server_port",
                    "upstream": {
                        "key": "query_string",
                        "type": "chash",
                        "nodes": {
                            "127.0.0.1:1980": 1,
                            "127.0.0.1:1981": 1,
                            "127.0.0.1:1982": 1
                        }
                    }
                }]]
                )

            if code >= 300 then
                ngx.status = code
            end
            ngx.say(body)
        }
    }
--- request
GET /t
--- response_body
passed
--- no_error_log
[error]



=== TEST 8: hit routes with querystring
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port?var=2&var2="

            local t = {}
            local ports_count = {}
            for i = 1, 180 do
                local th = assert(ngx.thread.spawn(function(i)
                    local httpc = http.new()
                    local res, err = httpc:request_uri(uri..i, {method = "GET"})
                    if not res then
                        ngx.log(ngx.ERR, err)
                        return
                    end
                    ports_count[res.body] = (ports_count[res.body] or 0) + 1
                end, i))
                table.insert(t, th)
            end
            for i, th in ipairs(t) do
                ngx.thread.wait(th)
            end

            local ports_arr = {}
            for port, count in pairs(ports_count) do
                table.insert(ports_arr, {port = port, count = count})
            end

            local function cmd(a, b)
                return a.count > b.count
            end
            table.sort(ports_arr, cmd)

            if (ports_arr[1].count - ports_arr[3].count) / ports_arr[2].count > 0.2 then
                ngx.say(require("toolkit.json").encode(ports_arr))
            else
                ngx.say('ok')
            end
        }
    }
--- request
GET /t
--- wait: 5
--- response_body
ok
--- no_error_log
[error]



=== TEST 9: set route(three upstream node with arg_xxx)
--- config
    location /t {
        content_by_lua_block {
            local t = require("lib.test_admin").test
            local code, body = t('/apisix/admin/routes/1',
                 ngx.HTTP_PUT,
                 [[{
                    "uri": "/server_port",
                    "upstream": {
                        "key": "arg_device_id",
                        "type": "chash",
                        "nodes": {
                            "127.0.0.1:1980": 1,
                            "127.0.0.1:1981": 1,
                            "127.0.0.1:1982": 1
                        }
                    }
                }]]
                )

            if code >= 300 then
                ngx.status = code
            end
            ngx.say(body)
        }
    }
--- request
GET /t
--- response_body
passed
--- no_error_log
[error]



=== TEST 10: hit routes with args
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port?device_id="

            local t = {}
            local ports_count = {}
            for i = 1, 180 do
                local th = assert(ngx.thread.spawn(function(i)
                    local httpc = http.new()
                    local res, err = httpc:request_uri(uri..i, {method = "GET"})
                    if not res then
                        ngx.log(ngx.ERR, err)
                        return
                    end
                    ports_count[res.body] = (ports_count[res.body] or 0) + 1
                end, i))
                table.insert(t, th)
            end
            for i, th in ipairs(t) do
                ngx.thread.wait(th)
            end

            local ports_arr = {}
            for port, count in pairs(ports_count) do
                table.insert(ports_arr, {port = port, count = count})
            end

            local function cmd(a, b)
                return a.count > b.count
            end
            table.sort(ports_arr, cmd)

            if (ports_arr[1].count - ports_arr[3].count) / ports_arr[2].count > 0.2 then
                ngx.say(require("toolkit.json").encode(ports_arr))
            else
                ngx.say('ok')
            end
        }
    }
--- request
GET /t
--- wait: 5
--- response_body
ok
--- no_error_log
[error]



=== TEST 11: set route(weight 0)
--- config
    location /t {
        content_by_lua_block {
            local t = require("lib.test_admin").test
            local code, body = t('/apisix/admin/routes/1',
                 ngx.HTTP_PUT,
                 [[{
                    "uri": "/server_port",
                    "upstream": {
                        "key": "arg_device_id",
                        "type": "chash",
                        "nodes": {
                            "127.0.0.1:1980": 0,
                            "127.0.0.1:1981": 0
                        }
                    }
                }]]
                )

            if code >= 300 then
                ngx.status = code
            end
            ngx.say(body)
        }
    }
--- request
GET /t
--- response_body
passed
--- no_error_log
[error]



=== TEST 12: hit routes
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port?device_id=1"

            local httpc = http.new()
            local res, err = httpc:request_uri(uri, {method = "GET"})
            if not res then
                ngx.say(err)
                return
            end

            ngx.status = res.status
            ngx.say(res.body)
        }
    }
--- request
GET /t
--- error_code_like: ^(?:50\d)$
--- error_log
failed to find valid upstream server, no valid upstream node



=== TEST 13: set route(ensure retry can try every node)
--- config
    location /t {
        content_by_lua_block {
            local t = require("lib.test_admin").test
            local code, body = t('/apisix/admin/routes/1',
                 ngx.HTTP_PUT,
                 [[{
                    "uri": "/server_port",
                    "upstream": {
                        "key": "arg_device_id",
                        "type": "chash",
                        "nodes": {
                            "127.0.0.1:1979": 1000,
                            "127.0.0.1:1980": 1
                        }
                    }
                }]]
                )

            if code >= 300 then
                ngx.status = code
            end
            ngx.say(body)
        }
    }
--- request
GET /t
--- response_body
passed
--- no_error_log
[error]



=== TEST 14: hit routes
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port?device_id=1"

            local httpc = http.new()
            local res, err = httpc:request_uri(uri, {method = "GET"})
            if not res then
                ngx.say(err)
                return
            end

            ngx.say(res.status)
        }
    }
--- request
GET /t
--- response_body
200