<!--
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
-->

[Chinese](zh-cn/stand-alone.md)

## Stand-alone mode

Turning on the APISIX node in Stand-alone mode will no longer use the default etcd as the configuration center.

This method is more suitable for two types of users:
1. kubernetes(k8s)：Declarative API that dynamically updates the routing rules with a full yaml configuration.
2. Different configuration centers: There are many implementations of the configuration center, such as Consul, etc., using the full yaml file for intermediate conversion.

The routing rules in the `conf/apisix.yaml` file are loaded into memory immediately after the APISIX node service starts. And every time interval (default 1 second), will try to detect whether the file content is updated, if there is an update, reload the rule.

*Note*: When reloading and updating routing rules, they are all hot memory updates, and there will be no replacement of working processes, it is a hot update.

To enable Stand-alone model, we can set `apisix.config_center` to `yaml` in file `conf/config.yaml`.

Refer to the example below:

```yaml
apisix:
  # ...
  config_center: yaml   # etcd: use etcd to store the config value
                        # yaml: fetch the config value from local yaml file
                        # `/your_path/conf/apisix.yaml`
```

In addition, since the current Admin API is based on the etcd configuration center solution, the Admin API will not actually work when the Stand-alone mode is enabled.

## How to config rules

All of the rules are stored in one file which named `conf/apisix.yaml`,
the APISIX will check if this file has any changed every second.
If the file changed and we found `#END` at the end of the file,
APISIX will load the rules in this file and update to memory of APISIX.

Here is a mini example:

```yaml
routes:
  -
    uri: /hello
    upstream:
        nodes:
            "127.0.0.1:1980": 1
        type: roundrobin
#END
```

*NOTE*: APISIX will not load the rules into memory from file `conf/apisix.yaml` if there is no `#END` at the end.

#### How to config Router

Single Router：

```yaml
routes:
  -
    uri: /hello
    upstream:
        nodes:
            "127.0.0.1:1980": 1
        type: roundrobin
#END
```

Multiple Router：

```yaml
routes:
  -
    uri: /hello
    upstream:
        nodes:
            "127.0.0.1:1980": 1
        type: roundrobin
  -
    uri: /hello2
    upstream:
        nodes:
            "127.0.0.1:1981": 1
        type: roundrobin
#END
```


#### How to config Router + Service

```yml
routes:
    -
        uri: /hello
        service_id: 1
services:
    -
        id: 1
        upstream:
            nodes:
                "127.0.0.1:1980": 1
            type: roundrobin
#END
```

#### How to config Router + Upstream

```yml
routes:
    -
        uri: /hello
        upstream_id: 1
upstreams:
    -
        id: 1
        nodes:
            "127.0.0.1:1980": 1
        type: roundrobin
#END
```

#### How to config Router + Service + Upstream

```yml
routes:
    -
        uri: /hello
        service_id: 1
services:
    -
        id: 1
        upstream_id: 2
upstreams:
    -
        id: 2
        nodes:
            "127.0.0.1:1980": 1
        type: roundrobin
#END
```

#### How to config Plugins

```yml
# plugins listed here will be hot reloaded and override the boot configuration
plugins:
  - name: ip-restriction
  - name: jwt-auth
  - name: mqtt-proxy
    stream: true # set 'stream' to true for stream plugins
#END
```

#### How to enable SSL

```yml
ssl:
    -
        cert: |
            -----BEGIN CERTIFICATE-----
            MIIDrzCCApegAwIBAgIJAI3Meu/gJVTLMA0GCSqGSIb3DQEBCwUAMG4xCzAJBgNV
            BAYTAkNOMREwDwYDVQQIDAhaaGVqaWFuZzERMA8GA1UEBwwISGFuZ3pob3UxDTAL
            BgNVBAoMBHRlc3QxDTALBgNVBAsMBHRlc3QxGzAZBgNVBAMMEmV0Y2QuY2x1c3Rl
            ci5sb2NhbDAeFw0yMDEwMjgwMzMzMDJaFw0yMTEwMjgwMzMzMDJaMG4xCzAJBgNV
            BAYTAkNOMREwDwYDVQQIDAhaaGVqaWFuZzERMA8GA1UEBwwISGFuZ3pob3UxDTAL
            BgNVBAoMBHRlc3QxDTALBgNVBAsMBHRlc3QxGzAZBgNVBAMMEmV0Y2QuY2x1c3Rl
            ci5sb2NhbDCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAJ/qwxCR7g5S
            s9+VleopkLi5pAszEkHYOBpwF/hDeRdxU0I0e1zZTdTlwwPy2vf8m3kwoq6fmNCt
            tdUUXh5Wvgi/2OA8HBBzaQFQL1Av9qWwyES5cx6p0ZBwIrcXQIsl1XfNSUpQNTSS
            D44TGduXUIdeshukPvMvLWLezynf2/WlgVh/haWtDG99r/Gj3uBdjl0m/xGvKvIv
            NFy6EdgG9fkwcIalutjrUnGl9moGjwKYu4eXW2Zt5el0d1AHXUsqK4voe0p+U2Nz
            quDmvxteXWdlsz8o5kQT6a4DUtWhpPIfNj9oZfPRs3LhBFQ74N70kVxMOCdec1lU
            bnFzLIMGlz0CAwEAAaNQME4wHQYDVR0OBBYEFFHeljijrr+SPxlH5fjHRPcC7bv2
            MB8GA1UdIwQYMBaAFFHeljijrr+SPxlH5fjHRPcC7bv2MAwGA1UdEwQFMAMBAf8w
            DQYJKoZIhvcNAQELBQADggEBAG6NNTK7sl9nJxeewVuogCdMtkcdnx9onGtCOeiQ
            qvh5Xwn9akZtoLMVEdceU0ihO4wILlcom3OqHs9WOd6VbgW5a19Thh2toxKidHz5
            rAaBMyZsQbFb6+vFshZwoCtOLZI/eIZfUUMFqMXlEPrKru1nSddNdai2+zi5rEnM
            HCot43+3XYuqkvWlOjoi9cP+C4epFYrxpykVbcrtbd7TK+wZNiK3xtDPnVzjdNWL
            geAEl9xrrk0ss4nO/EreTQgS46gVU+tLC+b23m2dU7dcKZ7RDoiA9bdVc4a2IsaS
            2MvLL4NZ2nUh8hAEHiLtGMAV3C6xNbEyM07hEpDW6vk6tqk=
            -----END CERTIFICATE-----
        key: |
            -----BEGIN PRIVATE KEY-----
            MIIEvgIBADANBgkqhkiG9w0BAQEFAASCBKgwggSkAgEAAoIBAQCf6sMQke4OUrPf
            lZXqKZC4uaQLMxJB2DgacBf4Q3kXcVNCNHtc2U3U5cMD8tr3/Jt5MKKun5jQrbXV
            FF4eVr4Iv9jgPBwQc2kBUC9QL/alsMhEuXMeqdGQcCK3F0CLJdV3zUlKUDU0kg+O
            Exnbl1CHXrIbpD7zLy1i3s8p39v1pYFYf4WlrQxvfa/xo97gXY5dJv8RryryLzRc
            uhHYBvX5MHCGpbrY61JxpfZqBo8CmLuHl1tmbeXpdHdQB11LKiuL6HtKflNjc6rg
            5r8bXl1nZbM/KOZEE+muA1LVoaTyHzY/aGXz0bNy4QRUO+De9JFcTDgnXnNZVG5x
            cyyDBpc9AgMBAAECggEAatcEtehZPJaCeClPPF/Cwbe9YoIfe4BCk186lHI3z7K1
            5nB7zt+bwVY0AUpagv3wvXoB5lrYVOsJpa9y5iAb3GqYMc/XDCKfD/KLea5hwfcn
            BctEn0LjsPVKLDrLs2t2gBDWG2EU+udunwQh7XTdp2Nb6V3FdOGbGAg2LgrSwP1g
            0r4z14F70oWGYyTQ5N8UGuyryVrzQH525OYl38Yt7R6zJ/44FVi/2TvdfHM5ss39
            SXWi00Q30fzaBEf4AdHVwVCRKctwSbrIOyM53kiScFDmBGRblCWOxXbiFV+d3bjX
            gf2zxs7QYZrFOzOO7kLtHGua4itEB02497v+1oKDwQKBgQDOBvCVGRe2WpItOLnj
            SF8iz7Sm+jJGQz0D9FhWyGPvrN7IXGrsXavA1kKRz22dsU8xdKk0yciOB13Wb5y6
            yLsr/fPBjAhPb4h543VHFjpAQcxpsH51DE0b2oYOWMmz+rXGB5Jy8EkP7Q4njIsc
            2wLod1dps8OT8zFx1jX3Us6iUQKBgQDGtKkfsvWi3HkwjFTR+/Y0oMz7bSruE5Z8
            g0VOHPkSr4XiYgLpQxjbNjq8fwsa/jTt1B57+By4xLpZYD0BTFuf5po+igSZhH8s
            QS5XnUnbM7d6Xr/da7ZkhSmUbEaMeHONSIVpYNgtRo4bB9Mh0l1HWdoevw/w5Ryt
            L/OQiPhfLQKBgQCh1iG1fPh7bbnVe/HI71iL58xoPbCwMLEFIjMiOFcINirqCG6V
            LR91Ytj34JCihl1G4/TmWnsH1hGIGDRtJLCiZeHL70u32kzCMkI1jOhFAWqoutMa
            7obDkmwraONIVW/kFp6bWtSJhhTQTD4adI9cPCKWDXdcCHSWj0Xk+U8HgQKBgBng
            t1HYhaLzIZlP/U/nh3XtJyTrX7bnuCZ5FhKJNWrYjxAfgY+NXHRYCKg5x2F5j70V
            be7pLhxmCnrPTMKZhik56AaTBOxVVBaYWoewhUjV4GRAaK5Wc8d9jB+3RizPFwVk
            V3OU2DJ1SNZ+W2HBOsKrEfwFF/dgby6i2w6MuAP1AoGBAIxvxUygeT/6P0fHN22P
            zAHFI4v2925wYdb7H//D8DIADyBwv18N6YH8uH7L+USZN7e4p2k8MGGyvTXeC6aX
            IeVtU6fH57Ddn59VPbF20m8RCSkmBvSdcbyBmqlZSBE+fKwCliKl6u/GH0BNAWKz
            r8yiEiskqRmy7P7MY9hDmEbG
            -----END PRIVATE KEY-----
        sni: "yourdomain.com"
#END
```