test/apisix
1
0
Fork 0
mirror of https://gitee.com/iresty/apisix.git synced 2024-12-15 17:31:45 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
210ca462b7
apisix/docs/en/latest/admin-api.md

868 lines
36 KiB
Markdown
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

---
title: Admin API
---
<!--
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
-->
## Table of Contents
- [Route](#route)
- [Service](#service)
- [Consumer](#consumer)
- [Upstream](#upstream)
- [SSL](#ssl)
- [Global Rule](#global-rule)
- [Plugin config](#plugin-config)
- [Plugin Metadata](#plugin-metadata)
- [Plugin](#plugin)
## Route
*API*：/apisix/admin/routes/{id}?ttl=0
*Description*：Route matches requests based on preset rules, and loads the appropriate plugin according to the matching result, then forwarding requests to target Upstream.
Note: When the `Admin API` is enabled, it will occupy the API prefixed with `/apisix/admin`. Therefore, in order to avoid conflicts between your design API and `/apisix/admin`, it is recommended to use a different port for the Admin API. You can customize the Admin API port through `port_admin` in `conf/config.yaml`.
> Request Methods：
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/routes|NULL|Fetch resource list|
|GET |/apisix/admin/routes/{id}|NULL|Fetch resource|
|PUT |/apisix/admin/routes/{id}|{...}|Create resource by ID|
|POST |/apisix/admin/routes |{...}|Create resource, and ID is generated by server|
|DELETE |/apisix/admin/routes/{id}|NULL|Remove resource|
|PATCH |/apisix/admin/routes/{id}|{...}|Standard PATCH. Update some attributes of the existing Route, and other attributes not involved will remain as they are; if you want to delete an attribute, set the value of the attribute Set to null to delete; especially, when the value of the attribute is an array, the attribute will be updated in full|
|PATCH |/apisix/admin/routes/{id}/{path}|{...}|SubPath PATCH, specify the attribute of Route to be updated through {path}, update the value of this attribute in full, and other attributes that are not involved will remain as they are. The difference between the two PATCH can refer to the following examples|
> URI Request Parameters：
|parameter |Required |Type |Description |Example|
|---------|---------|----|-----------|----|
|ttl |False |Auxiliary |Expires after target seconds|ttl=1|
> Request Body Parameters：
|Parameter |Required |Type |Description |Example|
|---------|---------|----|-----------|----|
|name |False |Auxiliary |Identifies route names.|customer-xxxx|
|desc |False |Auxiliary |route description, usage scenarios, and more.|customer xxxx|
|uri |True, can't be used with `uris` |Match Rules|In addition to full matching such as `/foo/bar`、`/foo/gloo`, using different [Router](architecture-design.md#router) allows more advanced matching, see [Router](architecture-design.md#router) for more.|"/hello"|
|uris |True, can't be used with `uri`|Match Rules|The `uri` in the form of a non-empty list means that multiple different uris are allowed, and match any one of them.|["/hello", "/word"]|
|host |False, can't be used with `hosts` |Match Rules|Currently requesting a domain name, such as `foo.com`; PAN domain names such as `*.foo.com` are also supported.|"foo.com"|
|hosts |False, can't be used with `host` |Match Rules|The `host` in the form of a non-empty list means that multiple different hosts are allowed, and match any one of them.|{"foo.com", "*.bar.com"}|
|remote_addr|False, can't be used with `remote_addrs` |Match Rules|The client requests an IP address: `192.168.1.101`, `192.168.1.102`, and CIDR format support `192.168.1.0/24`. In particular, APISIX also fully supports IPv6 address matching: `::1`, `fe80::1`, `fe80::1/64`, etc.|"192.168.1.0/24"|
|remote_addrs|False, can't be used with `remote_addr` |Match Rules|The `remote_addr` in the form of a non-empty list indicates that multiple different IP addresses are allowed, and match any one of them.|{"127.0.0.1", "192.0.0.0/8", "::1"}|
|methods |False |Match Rules|If empty or without this option, there are no `method` restrictions, and it can be a combination of one or more: `GET`,`POST`,`PUT`,`DELETE`,`PATCH`, `HEAD`,`OPTIONS`,`CONNECT`,`TRACE`.|{"GET", "POST"}|
|priority |False |Match Rules|If different routes contain the same `uri`, determine which route is matched first based on the attribute `priority`. Larger value means higher priority. The default value is 0.|priority = 10|
|vars |False |Match Rules |A list of one or more `{var, operator, val}` elements, like this: `{{var, operator, val}, {var, operator, val}, ...}}`. For example: `{"arg_name", "==", "json"}` means that the current request parameter `name` is `json`. The `var` here is consistent with the internal variable name of Nginx, so you can also use `request_uri`, `host`, etc. For more details, see [lua-resty-expr](https://github.com/api7/lua-resty-expr) |{{"arg_name", "==", "json"}, {"arg_age", ">", 18}}|
|filter_func|False|Match Rules|User-defined filtering function. You can use it to achieve matching requirements for special scenarios. This function accepts an input parameter named `vars` by default, which you can use to get Nginx variables.|function(vars) return vars["arg_name"] == "json" end|
|plugins |False |Plugin|See [Plugin](architecture-design.md#plugin) for more ||
|script |False |Script|See [Script](architecture-design.md#script) for more ||
|upstream |False |Upstream|Enabled Upstream configuration, see [Upstream](architecture-design.md#upstream) for more||
|upstream_id|False |Upstream|Enabled upstream id, see [Upstream](architecture-design.md#upstream) for more ||
|service_id|False |Service|Binded Service configuration, see [Service](architecture-design.md#service) for more ||
|plugin_config_id|False, can't be used with `script` |Plugin|Binded plugin config object, see [Plugin Config](architecture-design.md#plugin-config) for more ||
|labels |False |Match Rules|Key/value pairs to specify attributes|{"version":"v2","build":"16","env":"production"}|
|enable_websocket|False|Auxiliary| enable `websocket`(boolean), default `false`.||
|status |False|Auxiliary| enable this route, default `1`.|`1` to enable, `0` to disable|
|create_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
|update_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
For the same type of parameters, such as `host` and `hosts`, `remote_addr` and `remote_addrs` cannot exist at the same time, only one of them can be selected. If enabled at the same time, the API will respond with an error.
Config Example:
```shell
{
"id": "1", # id, unnecessary.
"uris": ["/a","/b"], # A set of uri.
"methods": ["GET","POST"], # Can fill multiple methods
"hosts": ["a.com","b.com"], # A set of host.
"plugins": {}, # Bound plugin
"priority": 0, # If different routes contain the same `uri`, determine which route is matched first based on the attribute` priority`, the default value is 0.
"name": "route-xxx",
"desc": "hello world",
"remote_addrs": ["127.0.0.1"], # A set of Client IP.
"vars": [], # A list of one or more `{var, operator, val}` elements
"upstream_id": "1", # upstream id, recommended
"upstream": {}, # upstream, not recommended
"filter_func": "", # User-defined filtering function
}
```
Example：
```shell
# Create a route
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -i -d '
{
"uri": "/index.html",
"hosts": ["foo.com", "*.bar.com"],
"remote_addrs": ["127.0.0.0/8"],
"methods": ["PUT", "GET"],
"enable_websocket": true,
"upstream": {
"type": "roundrobin",
"nodes": {
"39.97.63.215:80": 1
}
}
}'
HTTP/1.1 201 Created
Date: Sat, 31 Aug 2019 01:17:15 GMT
...
# Create a route expires after 60 seconds, then it's deleted automatically
$ curl http://127.0.0.1:9080/apisix/admin/routes/2?ttl=60 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -i -d '
{
"uri": "/aa/index.html",
"upstream": {
"type": "roundrobin",
"nodes": {
"39.97.63.215:80": 1
}
}
}'
HTTP/1.1 201 Created
Date: Sat, 31 Aug 2019 01:17:15 GMT
...
# Add an upstream node to the Route
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"upstream": {
"nodes": {
"39.97.63.216:80": 1
}
}
}'
HTTP/1.1 200 OK
...
After successful execution, upstream nodes will be updated to:
{
"39.97.63.215:80": 1,
"39.97.63.216:80": 1
}
# Update the weight of an upstream node to the Route
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"upstream": {
"nodes": {
"39.97.63.216:80": 10
}
}
}'
HTTP/1.1 200 OK
...
After successful execution, upstream nodes will be updated to:
{
"39.97.63.215:80": 1,
"39.97.63.216:80": 10
}
# Delete an upstream node for the Route
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"upstream": {
"nodes": {
"39.97.63.215:80": null
}
}
}'
HTTP/1.1 200 OK
...
After successful execution, upstream nodes will be updated to:
{
"39.97.63.216:80": 10
}
# Replace methods of the Route -- array
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '{
"methods": ["GET", "POST"]
}'
HTTP/1.1 200 OK
...
After successful execution, methods will not retain the original data, and the entire update is:
["GET", "POST"]
# Replace upstream nodes of the Route -- sub path
$ curl http://127.0.0.1:9080/apisix/admin/routes/1/upstream/nodes -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"39.97.63.200:80": 1
}'
HTTP/1.1 200 OK
...
After successful execution, nodes will not retain the original data, and the entire update is:
{
"39.97.63.200:80": 1
}
# Replace methods of the Route -- sub path
$ curl http://127.0.0.1:9080/apisix/admin/routes/1/methods -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d'["POST", "DELETE", " PATCH"]'
HTTP/1.1 200 OK
...
After successful execution, methods will not retain the original data, and the entire update is:
["POST", "DELETE", "PATCH"]
# disable route
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"status": 0
}'
HTTP/1.1 200 OK
...
After successful execution, status nodes will be updated to:
{
"status": 0
}
# enable route
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"status": 1
}'
HTTP/1.1 200 OK
...
After successful execution, status nodes will be updated to:
{
"status": 1
}
```
> Response Parameters
Return response from etcd currently.
[Back to TOC](#table-of-contents)
## Service
*API*：/apisix/admin/services/{id}
*Description*：A `Service` is an abstraction of an API (which can also be understood as a set of Route abstractions). It usually corresponds to the upstream service abstraction. Between `Route` and `Service`, usually the relationship of N:1.
> Request Methods：
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/services|NULL|Fetch resource list|
|GET |/apisix/admin/services/{id}|NULL|Fetch resource|
|PUT |/apisix/admin/services/{id}|{...}|Create resource by ID|
|POST |/apisix/admin/services |{...}|Create resource, and ID is generated by server|
|DELETE |/apisix/admin/services/{id}|NULL|Remove resource|
|PATCH |/apisix/admin/services/{id}|{...}|Standard PATCH. Update some attributes of the existing Service, and other attributes not involved will remain as they are; if you want to delete an attribute, set the value of the attribute Set to null to delete; especially, when the value of the attribute is an array, the attribute will be updated in full|
|PATCH |/apisix/admin/services/{id}/{path}|{...}|SubPath PATCH, specify the attribute of Service to be updated through {path}, update the value of this attribute in full, and other attributes that are not involved will remain as they are. The difference between the two PATCH can refer to the following examples|
> Request Body Parameters：
|Parameter |Required |Type |Description |Example|
|---------|---------|----|-----------|----|
|plugins |False |Plugin|See [Plugin](architecture-design.md#plugin) for more ||
|upstream |False |Upstream|Enabled Upstream configuration, see [Upstream](architecture-design.md#upstream) for more||
|upstream_id|False |Upstream|Enabled upstream id, see [Upstream](architecture-design.md#upstream) for more ||
|name |False |Auxiliary |Identifies service names.|customer-xxxx|
|desc |False |Auxiliary |service usage scenarios, and more.|customer xxxx|
|labels |False |Match Rules|Key/value pairs to specify attributes|{"version":"v2","build":"16","env":"production"}|
|enable_websocket|False|Auxiliary| enable `websocket`(boolean), default `false`.||
|create_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
|update_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
Config Example:
```shell
{
"id": "1", # id
"plugins": {}, # Bound plugin
"upstream_id": "1", # upstream id, recommended
"upstream": {}, # upstream, not recommended
"name": "service-test",
"desc": "hello world",
"enable_websocket": true,
}
```
Example：
```shell
$ curl http://127.0.0.1:9080/apisix/admin/services/201 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -i -d '
{
"plugins": {
"limit-count": {
"count": 2,
"time_window": 60,
"rejected_code": 503,
"key": "remote_addr"
}
},
"enable_websocket": true,
"upstream": {
"type": "roundrobin",
"nodes": {
"39.97.63.215:80": 1
}
}
}'
HTTP/1.1 201 Created
...
# Add an upstream node to the Service
$ curl http://127.0.0.1:9080/apisix/admin/services/201 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"upstream": {
"nodes": {
"39.97.63.216:80": 1
}
}
}'
HTTP/1.1 200 OK
...
After successful execution, upstream nodes will be updated to:
{
"39.97.63.215:80": 1,
"39.97.63.216:80": 1
}
# Update the weight of an upstream node to the Service
$ curl http://127.0.0.1:9080/apisix/admin/services/201 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"upstream": {
"nodes": {
"39.97.63.216:80": 10
}
}
}'
HTTP/1.1 200 OK
...
After successful execution, upstream nodes will be updated to:
{
"39.97.63.215:80": 1,
"39.97.63.216:80": 10
}
# Delete an upstream node for the Service
$ curl http://127.0.0.1:9080/apisix/admin/services/201 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"upstream": {
"nodes": {
"39.97.63.215:80": null
}
}
}'
HTTP/1.1 200 OK
...
After successful execution, upstream nodes will be updated to:
{
"39.97.63.216:80": 10
}
# Replace upstream nodes of the Service
$ curl http://127.0.0.1:9080/apisix/admin/services/201/upstream/nodes -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"39.97.63.200:80": 1
}'
HTTP/1.1 200 OK
...
After successful execution, upstream nodes will not retain the original data, and the entire update is:
{
"39.97.63.200:80": 1
}
```
> Response Parameters
Return response from etcd currently.
[Back to TOC](#table-of-contents)
## Consumer
*API*：/apisix/admin/consumers/{username}
*Description*：Consumers are consumers of certain types of services and can only be used in conjunction with a user authentication system. Consumer regards the `username` property as the identity, so only the HTTP `PUT` method is supported for creating a new consumer.
> Request Methods：
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/consumers|NULL|Fetch resource list|
|GET |/apisix/admin/consumers/{username}|NULL|Fetch resource|
|PUT |/apisix/admin/consumers|{...}|Create resource by username|
|DELETE |/apisix/admin/consumers/{username}|NULL|Remove resource|
> Request Body Parameters：
|Parameter |Required |Type |Description |Example|
|---------|---------|----|-----------|----|
|username|True|Name|Consumer name||
|plugins |False |Plugin|See [Plugin](architecture-design.md#plugin) for more ||
|desc |False |Auxiliary |Identifies route names, usage scenarios, and more.|customer xxxx|
|labels |False |Match Rules|Key/value pairs to specify attributes|{"version":"v2","build":"16","env":"production"}|
|create_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
|update_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
Config Example:
```shell
{
"plugins": {}, # Bound plugin
"username": "name", # Consumer name
"desc": "hello world", # Consumer desc
}
```
The binding authentication plug-in is a bit special. When it needs to be used in conjunction with the consumer, it needs to provide user name, password and other information; on the other hand, when it is bound with route / service, it does not require any parameters. Because at this time, it is based on the user request data to infer which consumer the user corresponds to.
Example:
```shell
$ curl http://127.0.0.1:9080/apisix/admin/consumers -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -i -d '
{
"username": "jack",
"plugins": {
"key-auth": {
"key": "auth-one"
},
"limit-count": {
"count": 2,
"time_window": 60,
"rejected_code": 503,
"key": "remote_addr"
}
}
}'
HTTP/1.1 200 OK
Date: Thu, 26 Dec 2019 08:17:49 GMT
...
{"node":{"value":{"username":"jack","plugins":{"key-auth":{"key":"auth-one"},"limit-count":{"time_window":60,"count":2,"rejected_code":503,"key":"remote_addr","policy":"local"}}},"createdIndex":64,"key":"\/apisix\/consumers\/jack","modifiedIndex":64},"prevNode":{"value":"{\"username\":\"jack\",\"plugins\":{\"key-auth\":{\"key\":\"auth-one\"},\"limit-count\":{\"time_window\":60,\"count\":2,\"rejected_code\":503,\"key\":\"remote_addr\",\"policy\":\"local\"}}}","createdIndex":63,"key":"\/apisix\/consumers\/jack","modifiedIndex":63},"action":"set"}
```
Since `v2.2`, we can bind multiple authentication plugins to the same consumer.
> Response Parameters
Return response from etcd currently.
[Back to TOC](#table-of-contents)
## Upstream
*API*：/apisix/admin/upstreams/{id}
*Description*：Upstream configuration can be directly bound to the specified `Route` or it can be bound to `Service`, but the configuration in `Route` has a higher priority. The priority behavior here is very similar to `Plugin`.
> Request Methods：
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/upstreams|NULL|Fetch resource list|
|GET |/apisix/admin/upstreams/{id}|NULL|Fetch resource|
|PUT |/apisix/admin/upstreams/{id}|{...}|Create resource by ID|
|POST |/apisix/admin/upstreams |{...}|Create resource, and ID is generated by server|
|DELETE |/apisix/admin/upstreams/{id}|NULL|Remove resource|
|PATCH |/apisix/admin/upstreams/{id}|{...}|Standard PATCH. Update some attributes of the existing Upstream, and other attributes not involved will remain as they are; if you want to delete an attribute, set the value of the attribute Set to null to delete; especially, when the value of the attribute is an array, the attribute will be updated in full|
|PATCH |/apisix/admin/upstreams/{id}/{path}|{...}|SubPath PATCH, specify the attribute of Upstream to be updated through {path}, update the value of this attribute in full, and other attributes that are not involved will remain as they are. The difference between the two PATCH can refer to the following example|
> Request Body Parameters：
In addition to the basic complex equalization algorithm selection, APISIX's Upstream also supports logic for upstream passive health check and retry, see the table below.
|Name |Optional|Description|
|----------------|--------|-----------|
|type |required|the balancer algorithm|
|nodes |required, can't be used with `service_name` |Hash table, the key of the internal element is the upstream machine address list, the format is `Address + Port`, where the address part can be IP or domain name, such as `192.168.1.100:80`, `foo.com:80`, etc. Value is the weight of the node. In particular, when the weight value is `0`, it has a special meaning, which usually means that the upstream node is invalid and never wants to be selected. The `nodes` can be empty, which means it is a placeholder and will be filled later. Clients use such an upstream will get 502 response. |
|service_name |required, can't be used with `nodes` |the name of service used in the service discovery, see [discovery](discovery.md) for more details|
|discovery_type |required, if `service_name` is used | the type of service discovery, see [discovery](discovery.md) for more details|
|hash_on |optional|This option is only valid if the `type` is `chash`. Supported types `vars`(Nginx variables), `header`(custom header), `cookie`, `consumer`, the default value is `vars`.|
|key |optional|This option is only valid if the `type` is `chash`. Find the corresponding node `id` according to `hash_on` and `key`. When `hash_on` is set as `vars`, `key` is the required parameter, for now, it support nginx built-in variables like `uri, server_name, server_addr, request_uri, remote_port, remote_addr, query_string, host, hostname, arg_***`, `arg_***` is arguments in the request line, [Nginx variables list](http://nginx.org/en/docs/varindex.html). When `hash_on` is set as `header`, `key` is the required parameter, and `header name` is customized. When `hash_on` is set to `cookie`, `key` is the required parameter, and `cookie name` is customized. When `hash_on` is set to `consumer`, `key` does not need to be set. In this case, the `key` adopted by the hash algorithm is the `consumer_name` authenticated. If the specified `hash_on` and `key` can not fetch values, it will be fetch `remote_addr` by default.|
|checks |optional|Configure the parameters of the health check. For details, refer to [health-check](health-check.md).|
|retries |optional|Pass the request to the next upstream using the underlying Nginx retry mechanism, the retry mechanism is enabled by default and set the number of retries according to the number of available backend nodes. If `retries` option is explicitly set, it will override the default value. `0` means disable retry mechanism.|
|timeout |optional| Set the timeout for connection, sending and receiving messages. |
|name |optional|Identifies upstream names|
|desc |optional|upstream usage scenarios, and more.|
|pass_host |optional| `host` option when the request is sent to the upstream, can be one of [`pass`, `node`, `rewrite`], the default option is `pass`. `pass`: Pass the client's host transparently to the upstream; `node`: Use the host configured in the node of `upstream`; `rewrite`: Use the value of the configuration `upstream_host`.|
|upstream_host |optional|Specify the host of the upstream request. This option is only valid if the `pass_host` is `rewrite`.|
|scheme |optional |The scheme used when talk with the upstream. The value is one of ['http', 'https', 'grpc', 'grpcs'], default to 'http'.|
|labels |optional |Key/value pairs to specify attributes|{"version":"v2","build":"16","env":"production"}|
|create_time |optional| epoch timestamp in second, like `1602883670`, will be created automatically if missing|
|update_time |optional| epoch timestamp in second, like `1602883670`, will be created automatically if missing|
`type` can be one of:
* `roundrobin`: roundrobin with weight
* `chash`: consistent hash
* `ewma`: pick one of node which has minimum latency. See https://en.wikipedia.org/wiki/EWMA_chart for details.
* `least_conn`: pick node which has the lowest `(active_conn + 1) / weight`. Note the `active connection` concept is the same with Nginx: it is a connection in used by a request.
`hash_on` can be set to different types:
1. when it is `vars`, the `key` is required. The `key` can be any [Nginx builtin variables](http://nginx.org/en/docs/varindex.html), without the prefix '$'.
1. when it is `header`, the `key` is required. It is equal to "http_`key`".
1. when it is `cookie`, the `key` is required. It is equal to "cookie_`key`".
1. when it is `consumer`, the `key` is optional. The key is the `consumer_name` set by authentication plugin.
1. when it is `vars_combinations`, the `key` is required. The `key` can be any [Nginx builtin variables](http://nginx.org/en/docs/varindex.html) combinations, such as `$request_uri$remote_addr`.
1. If there is no value for either `hash_on` or `key`, `remote_addr` will be used as key.
Config Example:
```shell
{
"id": "1", # id
"retries": 1, # retry times
"timeout": { # Set the timeout for connection, sending and receiving messages.
"connect":15,
"send":15,
"read":15,
},
"nodes": {"host:80": 100}, # Upstream machine address list, the format is `Address + Port`
"type":"roundrobin",
"checks": {}, # Health check parameters
"hash_on": "",
"key": "",
"name": "upstream-for-test",
"desc": "hello world",
}
```
Example：
```shell
$ curl http://127.0.0.1:9080/apisix/admin/upstreams/100 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -i -X PUT -d '
{
"type":"roundrobin",
"nodes":{
"127.0.0.1:80":1,
"127.0.0.2:80":2,
"foo.com:80":3
}
}'
HTTP/1.1 201 Created
Date: Thu, 26 Dec 2019 04:19:34 GMT
Content-Type: text/plain
...
# Add a node to the Upstream
$ curl http://127.0.0.1:9080/apisix/admin/upstreams/100 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"nodes": {
"39.97.63.216:80": 1
}
}'
HTTP/1.1 200 OK
...
After successful execution, nodes will be updated to:
{
"39.97.63.215:80": 1,
"39.97.63.216:80": 1
}
# Update the weight of a node to the Upstream
$ curl http://127.0.0.1:9080/apisix/admin/upstreams/100 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"nodes": {
"39.97.63.216:80": 10
}
}'
HTTP/1.1 200 OK
...
After successful execution, nodes will be updated to:
{
"39.97.63.215:80": 1,
"39.97.63.216:80": 10
}
# Delete a node for the Upstream
$ curl http://127.0.0.1:9080/apisix/admin/upstreams/100 -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"nodes": {
"39.97.63.215:80": null
}
}'
HTTP/1.1 200 OK
...
After successful execution, nodes will be updated to:
{
"39.97.63.216:80": 10
}
# Replace the nodes of the Upstream
$ curl http://127.0.0.1:9080/apisix/admin/upstreams/100/nodes -H'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PATCH -i -d '
{
"39.97.63.200:80": 1
}'
HTTP/1.1 200 OK
...
After the execution is successful, nodes will not retain the original data, and the entire update is:
{
"39.97.63.200:80": 1
}
```
Each node can be configured with a priority. A node with low priority will only be
used when all the nodes with higher priority are unavailable or tried.
As the default priority is 0, we can configure nodes with negative priority as the backup.
For example,
```json
{
"uri": "/hello",
"upstream": {
"type": "roundrobin",
"nodes": [
{"host": "127.0.0.1", "port": 1980, "weight": 2000},
{"host": "127.0.0.2", "port": 1980, "weight": 1, "priority": -1}
],
"checks": {
"active": {
"http_path": "/status",
"healthy": {
"interval": 1,
"successes": 1
},
"unhealthy": {
"interval": 1,
"http_failures": 1
}
}
}
}
}
```
Node `127.0.0.2` will be used only after `127.0.0.1` is unavaibled or tried.
Therefore it is the backup of `127.0.0.1`.
> Response Parameters
Return response from etcd currently.
[Back to TOC](#table-of-contents)
## SSL
*API*：/apisix/admin/ssl/{id}
*Description*：SSL.
> Request Methods：
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/ssl|NULL|Fetch resource list|
|GET |/apisix/admin/ssl/{id}|NULL|Fetch resource|
|PUT |/apisix/admin/ssl/{id}|{...}|Create resource by ID|
|POST |/apisix/admin/ssl |{...}|Create resource, and ID is generated by server|
|DELETE |/apisix/admin/ssl/{id}|NULL|Remove resource|
> Request Body Parameters：
|Parameter |Required |Type |Description |Example|
|---------|---------|----|-----------|----|
|cert|True|Certificate|https certificate||
|key|True|Private key|https private key||
|certs|False|An array of certificate|when you need to configure multiple certificate for the same domain, you can pass extra https certificates (excluding the one given as cert) in this field||
|keys|False|An array of private key|https private keys. The keys should be paired with certs above||
|snis|True|Match Rules|a non-empty arrays of https SNI||
|labels|False |Match Rules|Key/value pairs to specify attributes|{"version":"v2","build":"16","env":"production"}|
|create_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
|update_time|False| Auxiliary|epoch timestamp in second, will be created automatically if missing | 1602883670|
|status|False|Auxiliary|enable this SSL, default `1`.|`1` to enable, `0` to disable|
Config Example:
```shell
{
"id": "1", # id
"cert": "cert", # Certificate
"key": "key", # Private key
"snis": ["t.com"] # https SNI
}
```
## Global Rule
*API*：/apisix/admin/global_rules/{id}
*Description*: Set plugins which run globally. Those plugins will be run before any Route/Service level plugins.
> Request Methods：
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/global_rules|NULL|Fetch resource list|
|GET |/apisix/admin/global_rules/{id}|NULL|Fetch resource|
|PUT |/apisix/admin/global_rules/{id}|{...}|Create resource by ID|
|DELETE |/apisix/admin/global_rules/{id}|NULL|Remove resource|
|PATCH |/apisix/admin/global_rules/{id}|{...}|Standard PATCH. Update some attributes of the existing global rule, and other attributes not involved will remain as they are; if you want to delete an attribute, set the value of the attribute Set to null to delete; especially, when the value of the attribute is an array, the attribute will be updated in full|
|PATCH |/apisix/admin/global_rules/{id}/{path}|{...}|SubPath PATCH, specify the attribute of global rule to be updated through {path}, update the value of this attribute in full, and other attributes that are not involved will remain as they are.|
> Request Body Parameters：
|Parameter|Required|Description|Example|
|---------|---------|-----------|----|
|plugins |True |See [Plugin](architecture-design.md#plugin)||
|create_time|False|epoch timestamp in second, will be created automatically if missing | 1602883670|
|update_time|False|epoch timestamp in second, will be created automatically if missing | 1602883670|
## Plugin config
*API*：/apisix/admin/plugin_configs/{id}
*Description*: Provide a group of plugins which can be reused across routes.
> Request Methods：
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/plugin_configs|NULL|Fetch resource list|
|GET |/apisix/admin/plugin_configs/{id}|NULL|Fetch resource|
|PUT |/apisix/admin/plugin_configs/{id}|{...}|Create resource by ID|
|DELETE |/apisix/admin/plugin_configs/{id}|NULL|Remove resource|
|PATCH |/apisix/admin/plugin_configs/{id}|{...}|Standard PATCH. Update some attributes of the existing plugin config, and other attributes not involved will remain as they are; if you want to delete an attribute, set the value of the attribute Set to null to delete; especially, when the value of the attribute is an array, the attribute will be updated in full|
|PATCH |/apisix/admin/plugin_configs/{id}/{path}|{...}|SubPath PATCH, specify the attribute of plugin config to be updated through {path}, update the value of this attribute in full, and other attributes that are not involved will remain as they are.|
> Request Body Parameters：
|Parameter|Required|Description|Example|
|---------|---------|-----------|----|
|plugins |True |See [Plugin](architecture-design.md#plugin)||
|desc |False|description, usage scenarios, and more.|customer xxxx|
|labels |False|Key/value pairs to specify attributes|{"version":"v2","build":"16","env":"production"}|
|create_time|False|epoch timestamp in second, will be created automatically if missing | 1602883670|
|update_time|False|epoch timestamp in second, will be created automatically if missing | 1602883670|
[Back to TOC](#table-of-contents)
## Plugin Metadata
*API*：/apisix/admin/plugin_metadata/{plugin_name}
*Description*: plugin metadata.
> Request Methods:
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/plugin_metadata/{plugin_name}|NULL|Fetch resource|
|PUT |/apisix/admin/plugin_metadata/{plugin_name}|{...}|Create resource by plugin name|
|DELETE |/apisix/admin/plugin_metadata/{plugin_name}|NULL|Remove resource|
> Request Body Parameters:
A json object with a data structure defined according to `metadata_schema` of the plugin ({plugin_name}).
Config Example:
```shell
$ curl http://127.0.0.1:9080/apisix/admin/plugin_metadata/example-plugin -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -i -X PUT -d '
{
"skey": "val",
"ikey": 1
}'
HTTP/1.1 201 Created
Date: Thu, 26 Dec 2019 04:19:34 GMT
Content-Type: text/plain
```
[Back to TOC](#table-of-contents)
## Plugin
*API*：/apisix/admin/plugins/{plugin_name}
*Description*: plugin
> Request Methods:
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET      |/apisix/admin/plugins/list|NULL|Fetch resource list|
|GET      |/apisix/admin/plugins/{plugin_name}|NULL|Fetch resource|
> Request Body Parameters:
Get the plugin ({plugin_name}) of the data structure.
Example：
```shell
$ curl "http://127.0.0.1:9080/apisix/admin/plugins/list" -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1'
["zipkin","request-id",...]
$ curl "http://127.0.0.1:9080/apisix/admin/plugins/key-auth" -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1'
{"properties":{"disable":{"type":"boolean"}},"additionalProperties":false,"type":"object"}
```
*API*：/apisix/admin/plugins?all=true
*Description*: all the attributes of all plugins, each plugin includes `name`, `priority`, `type`, `schema`, `consumer_schema` and `version`.
> Request Methods:
|Method |Request URI|Request Body|Description |
|---------|-------------------------|--|------|
|GET |/apisix/admin/plugins?all=true|NULL|Fetch resource|
[Back to TOC](#table-of-contents)
Reference in New Issue View Git Blame Copy Permalink