apisix/conf/config-default.yaml
2022-03-21 17:22:45 +08:00

460 lines
25 KiB
YAML

#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# PLEASE DO NOT UPDATE THIS FILE!
# If you want to set the specified configuration value, you can set the new
# value in the conf/config.yaml file.
#
apisix:
# node_listen: 9080 # APISIX listening port
node_listen: # This style support multiple ports
- 9080
# - port: 9081
# enable_http2: true # If not set, the default value is `false`.
# - ip: 127.0.0.2 # Specific IP, If not set, the default value is `0.0.0.0`.
# port: 9082
# enable_http2: true
enable_admin: true
enable_admin_cors: true # Admin API support CORS response headers.
enable_dev_mode: false # Sets nginx worker_processes to 1 if set to true
enable_reuseport: true # Enable nginx SO_REUSEPORT switch if set to true.
show_upstream_status_in_response_header: false # when true all upstream status write to `X-APISIX-Upstream-Status` otherwise only 5xx code
enable_ipv6: true
config_center: etcd # etcd: use etcd to store the config value
# yaml: fetch the config value from local yaml file `/your_path/conf/apisix.yaml`
#proxy_protocol: # Proxy Protocol configuration
#listen_http_port: 9181 # The port with proxy protocol for http, it differs from node_listen and port_admin.
# This port can only receive http request with proxy protocol, but node_listen & port_admin
# can only receive http request. If you enable proxy protocol, you must use this port to
# receive http request with proxy protocol
#listen_https_port: 9182 # The port with proxy protocol for https
#enable_tcp_pp: true # Enable the proxy protocol for tcp proxy, it works for stream_proxy.tcp option
#enable_tcp_pp_to_upstream: true # Enables the proxy protocol to the upstream server
enable_server_tokens: true # Whether the APISIX version number should be shown in Server header.
# It's enabled by default.
# configurations to load third party code and/or override the builtin one.
extra_lua_path: "" # extend lua_package_path to load third party code
extra_lua_cpath: "" # extend lua_package_cpath to load third party code
#lua_module_hook: "my_project.my_hook" # the hook module which will be used to inject third party code into APISIX
proxy_cache: # Proxy Caching configuration
cache_ttl: 10s # The default caching time in disk if the upstream does not specify the cache time
zones: # The parameters of a cache
- name: disk_cache_one # The name of the cache, administrator can specify
# which cache to use by name in the admin api (disk|memory)
memory_size: 50m # The size of shared memory, it's used to store the cache index for
# disk strategy, store cache content for memory strategy (disk|memory)
disk_size: 1G # The size of disk, it's used to store the cache data (disk)
disk_path: /tmp/disk_cache_one # The path to store the cache data (disk)
cache_levels: 1:2 # The hierarchy levels of a cache (disk)
#- name: disk_cache_two
# memory_size: 50m
# disk_size: 1G
# disk_path: "/tmp/disk_cache_two"
# cache_levels: "1:2"
- name: memory_cache
memory_size: 50m
allow_admin: # http://nginx.org/en/docs/http/ngx_http_access_module.html#allow
- 127.0.0.0/24 # If we don't set any IP list, then any IP access is allowed by default.
#- "::/64"
#admin_listen: # use a separate port
# ip: 127.0.0.1 # Specific IP, if not set, the default value is `0.0.0.0`.
# port: 9180
#port_admin: 9180 # Not recommend: This parameter should be set via the `admin_listen`.
#https_admin: true # enable HTTPS when use a separate port for Admin API.
# Admin API will use conf/apisix_admin_api.crt and conf/apisix_admin_api.key as certificate.
admin_api_mtls: # Depends on `port_admin` and `https_admin`.
admin_ssl_cert: "" # Path of your self-signed server side cert.
admin_ssl_cert_key: "" # Path of your self-signed server side key.
admin_ssl_ca_cert: "" # Path of your self-signed ca cert.The CA is used to sign all admin api callers' certificates.
# Default token when use API to call for Admin API.
# *NOTE*: Highly recommended to modify this value to protect APISIX's Admin API.
# Disabling this configuration item means that the Admin API does not
# require any authentication.
admin_key:
-
name: admin
key: edd1c9f034335f136f87ad84b625c8f1
role: admin # admin: manage all configuration data
# viewer: only can view configuration data
-
name: viewer
key: 4054f7cf07e344346cd3f287985e76a2
role: viewer
delete_uri_tail_slash: false # delete the '/' at the end of the URI
router:
http: radixtree_uri # radixtree_uri: match route by uri(base on radixtree)
# radixtree_host_uri: match route by host + uri(base on radixtree)
# radixtree_uri_with_parameter: like radixtree_uri but match uri with parameters,
# see https://github.com/api7/lua-resty-radixtree/#parameters-in-path for
# more details.
ssl: radixtree_sni # radixtree_sni: match route by SNI(base on radixtree)
#stream_proxy: # TCP/UDP proxy
# only: true # use stream proxy only, don't enable HTTP stuff
# tcp: # TCP proxy port list
# - addr: 9100
# tls: true
# - addr: "127.0.0.1:9101"
# udp: # UDP proxy port list
# - 9200
# - "127.0.0.1:9201"
#dns_resolver: # If not set, read from `/etc/resolv.conf`
# - 1.1.1.1
# - 8.8.8.8
#dns_resolver_valid: 30 # if given, override the TTL of the valid records. The unit is second.
resolver_timeout: 5 # resolver timeout
enable_resolv_search_opt: true # enable search option in resolv.conf
ssl:
enable: true
listen: # APISIX listening port in https.
- 9443
# - port: 9444
# enable_http2: true # If not set, the default value is `false`.
# - ip: 127.0.0.3 # Specific IP, If not set, the default value is `0.0.0.0`.
# port: 9445
# enable_http2: true
enable_http2: true # Not recommend: This parameter should be set via the `listen`.
# listen_port: 9443 # Not recommend: This parameter should be set via the `listen`.
#ssl_trusted_certificate: /path/to/ca-cert # Specifies a file path with trusted CA certificates in the PEM format
# used to verify the certificate when APISIX needs to do SSL/TLS handshaking
# with external services (e.g. etcd)
ssl_protocols: TLSv1.2 TLSv1.3
ssl_ciphers: ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
ssl_session_tickets: false # disable ssl_session_tickets by default for 'ssl_session_tickets' would make Perfect Forward Secrecy useless.
# ref: https://github.com/mozilla/server-side-tls/issues/135
key_encrypt_salt: edd1c9f0985e76a2 # If not set, will save origin ssl key into etcd.
# If set this, must be a string of length 16. And it will encrypt ssl key with AES-128-CBC
# !!! So do not change it after saving your ssl, it can't decrypt the ssl keys have be saved if you change !!
#fallback_sni: "my.default.domain" # If set this, when the client doesn't send SNI during handshake, the fallback SNI will be used instead
enable_control: true
#control:
# ip: 127.0.0.1
# port: 9090
disable_sync_configuration_during_start: false # safe exit. Remove this once the feature is stable
nginx_config: # config for render the template to generate nginx.conf
#user: root # specifies the execution user of the worker process.
# the "user" directive makes sense only if the master process runs with super-user privileges.
# if you're not root user,the default is current user.
error_log: logs/error.log
error_log_level: warn # warn,error
worker_processes: auto # if you want use multiple cores in container, you can inject the number of cpu as environment variable "APISIX_WORKER_PROCESSES"
enable_cpu_affinity: true # enable cpu affinity, this is just work well only on physical machine
worker_rlimit_nofile: 20480 # the number of files a worker process can open, should be larger than worker_connections
worker_shutdown_timeout: 240s # timeout for a graceful shutdown of worker processes
max_pending_timers: 16384 # increase it if you see "too many pending timers" error
max_running_timers: 4096 # increase it if you see "lua_max_running_timers are not enough" error
event:
worker_connections: 10620
#envs: # allow to get a list of environment variables
# - TEST_ENV
stream:
enable_access_log: false # enable access log or not, default false
access_log: logs/access_stream.log
access_log_format: "$remote_addr [$time_local] $protocol $status $bytes_sent $bytes_received $session_time"
# create your custom log format by visiting http://nginx.org/en/docs/varindex.html
access_log_format_escape: default # allows setting json or default characters escaping in variables
lua_shared_dict:
etcd-cluster-health-check-stream: 10m
lrucache-lock-stream: 10m
plugin-limit-conn-stream: 10m
# As user can add arbitrary configurations in the snippet,
# it is user's responsibility to check the configurations
# don't conflict with APISIX.
main_configuration_snippet: |
# Add custom Nginx main configuration to nginx.conf.
# The configuration should be well indented!
http_configuration_snippet: |
# Add custom Nginx http configuration to nginx.conf.
# The configuration should be well indented!
http_server_configuration_snippet: |
# Add custom Nginx http server configuration to nginx.conf.
# The configuration should be well indented!
http_server_location_configuration_snippet: |
# Add custom Nginx http server location configuration to nginx.conf.
# The configuration should be well indented!
http_admin_configuration_snippet: |
# Add custom Nginx admin server configuration to nginx.conf.
# The configuration should be well indented!
http_end_configuration_snippet: |
# Add custom Nginx http end configuration to nginx.conf.
# The configuration should be well indented!
stream_configuration_snippet: |
# Add custom Nginx stream configuration to nginx.conf.
# The configuration should be well indented!
http:
enable_access_log: true # enable access log or not, default true
access_log: logs/access.log
access_log_format: "$remote_addr - $remote_user [$time_local] $http_host \"$request\" $status $body_bytes_sent $request_time \"$http_referer\" \"$http_user_agent\" $upstream_addr $upstream_status $upstream_response_time \"$upstream_scheme://$upstream_host$upstream_uri\""
access_log_format_escape: default # allows setting json or default characters escaping in variables
keepalive_timeout: 60s # timeout during which a keep-alive client connection will stay open on the server side.
client_header_timeout: 60s # timeout for reading client request header, then 408 (Request Time-out) error is returned to the client
client_body_timeout: 60s # timeout for reading client request body, then 408 (Request Time-out) error is returned to the client
client_max_body_size: 0 # The maximum allowed size of the client request body.
# If exceeded, the 413 (Request Entity Too Large) error is returned to the client.
# Note that unlike Nginx, we don't limit the body size by default.
send_timeout: 10s # timeout for transmitting a response to the client.then the connection is closed
underscores_in_headers: "on" # default enables the use of underscores in client request header fields
real_ip_header: X-Real-IP # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_header
real_ip_recursive: "off" # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_recursive
real_ip_from: # http://nginx.org/en/docs/http/ngx_http_realip_module.html#set_real_ip_from
- 127.0.0.1
- "unix:"
#custom_lua_shared_dict: # add custom shared cache to nginx.conf
# ipc_shared_dict: 100m # custom shared cache, format: `cache-key: cache-size`
# Enables or disables passing of the server name through TLS Server Name Indication extension (SNI, RFC 6066)
# when establishing a connection with the proxied HTTPS server.
proxy_ssl_server_name: true
upstream:
keepalive: 320 # Sets the maximum number of idle keepalive connections to upstream servers that are preserved in the cache of each worker process.
# When this number is exceeded, the least recently used connections are closed.
keepalive_requests: 1000 # Sets the maximum number of requests that can be served through one keepalive connection.
# After the maximum number of requests is made, the connection is closed.
keepalive_timeout: 60s # Sets a timeout during which an idle keepalive connection to an upstream server will stay open.
charset: utf-8 # Adds the specified charset to the "Content-Type" response header field, see
# http://nginx.org/en/docs/http/ngx_http_charset_module.html#charset
variables_hash_max_size: 2048 # Sets the maximum size of the variables hash table.
lua_shared_dict:
internal-status: 10m
plugin-limit-req: 10m
plugin-limit-count: 10m
prometheus-metrics: 10m
plugin-limit-conn: 10m
upstream-healthcheck: 10m
worker-events: 10m
lrucache-lock: 10m
balancer-ewma: 10m
balancer-ewma-locks: 10m
balancer-ewma-last-touched-at: 10m
plugin-limit-count-redis-cluster-slot-lock: 1m
tracing_buffer: 10m
plugin-api-breaker: 10m
etcd-cluster-health-check: 10m
discovery: 1m
jwks: 1m
introspection: 10m
access-tokens: 1m
ext-plugin: 1m
kubernetes: 1m
tars: 1m
etcd:
host: # it's possible to define multiple etcd hosts addresses of the same etcd cluster.
- "http://127.0.0.1:2379" # multiple etcd address, if your etcd cluster enables TLS, please use https scheme,
# e.g. https://127.0.0.1:2379.
prefix: /apisix # apisix configurations prefix
timeout: 30 # 30 seconds
#resync_delay: 5 # when sync failed and a rest is needed, resync after the configured seconds plus 50% random jitter
#health_check_timeout: 10 # etcd retry the unhealthy nodes after the configured seconds
health_check_retry: 2 # etcd retry time that only affects the health check, default 2
#user: root # root username for etcd
#password: 5tHkHhYkjr6cQY # root password for etcd
tls:
# To enable etcd client certificate you need to build APISIX-OpenResty, see
# https://apisix.apache.org/docs/apisix/how-to-build/#step-6-build-openresty-for-apache-apisix
#cert: /path/to/cert # path of certificate used by the etcd client
#key: /path/to/key # path of key used by the etcd client
verify: true # whether to verify the etcd endpoint certificate when setup a TLS connection to etcd,
# the default value is true, e.g. the certificate will be verified strictly.
#sni: # the SNI for etcd TLS requests. If missed, the host part of the URL will be used.
# HashiCorp Vault storage backend for sensitive data retrieval. The config shows an example of what APISIX expects if you
# wish to integrate Vault for secret (sensetive string, public private keys etc.) retrieval. APISIX communicates with Vault
# server HTTP APIs. By default, APISIX doesn't need this configuration.
# vault:
# host: "http://0.0.0.0:8200" # The host address where the vault server is running.
# timeout: 10 # request timeout 30 seconds
# token: root # Authentication token to access Vault HTTP APIs
# prefix: kv/apisix # APISIX supports vault kv engine v1, where sensitive data are being stored
# and retrieved through vault HTTP APIs. enabling a prefix allows you to better enforcement of
# policies, generate limited scoped tokens and tightly control the data that can be accessed
# from APISIX.
#discovery: # service discovery center
# dns:
# servers:
# - "127.0.0.1:8600" # use the real address of your dns server
# eureka:
# host: # it's possible to define multiple eureka hosts addresses of the same eureka cluster.
# - "http://127.0.0.1:8761"
# prefix: /eureka/
# fetch_interval: 30 # default 30s
# weight: 100 # default weight for node
# timeout:
# connect: 2000 # default 2000ms
# send: 2000 # default 2000ms
# read: 5000 # default 5000ms
graphql:
max_size: 1048576 # the maximum size limitation of graphql in bytes, default 1MiB
#ext-plugin:
#cmd: ["ls", "-l"]
plugins: # plugin list (sorted by priority)
- real-ip # priority: 23000
- client-control # priority: 22000
- proxy-control # priority: 21990
- zipkin # priority: 12011
#- skywalking # priority: 12010
#- opentelemetry # priority: 12009
- ext-plugin-pre-req # priority: 12000
- request-id # priority: 11010
- fault-injection # priority: 11000
- mocking # priority: 10900
- serverless-pre-function # priority: 10000
#- batch-requests # priority: 4010
- cors # priority: 4000
- ip-restriction # priority: 3000
- ua-restriction # priority: 2999
- referer-restriction # priority: 2990
- csrf # priority: 2980
- uri-blocker # priority: 2900
- request-validation # priority: 2800
- openid-connect # priority: 2599
- authz-casbin # priority: 2560
- wolf-rbac # priority: 2555
- ldap-auth # priority: 2540
- hmac-auth # priority: 2530
- basic-auth # priority: 2520
- jwt-auth # priority: 2510
- key-auth # priority: 2500
- consumer-restriction # priority: 2400
- forward-auth # priority: 2002
- opa # priority: 2001
- authz-keycloak # priority: 2000
#- error-log-logger # priority: 1091
- proxy-mirror # priority: 1010
- proxy-cache # priority: 1009
- proxy-rewrite # priority: 1008
- api-breaker # priority: 1005
- limit-conn # priority: 1003
- limit-count # priority: 1002
- limit-req # priority: 1001
#- node-status # priority: 1000
- gzip # priority: 995
- server-info # priority: 990
- traffic-split # priority: 966
- redirect # priority: 900
- response-rewrite # priority: 899
#- dubbo-proxy # priority: 507
- grpc-transcode # priority: 506
- grpc-web # priority: 505
- public-api # priority: 501
- prometheus # priority: 500
- datadog # priority: 495
- echo # priority: 412
- loggly # priority: 411
- http-logger # priority: 410
- splunk-hec-logging # priority: 409
- skywalking-logger # priority: 408
- google-cloud-logging # priority: 407
- sls-logger # priority: 406
- tcp-logger # priority: 405
- kafka-logger # priority: 403
- rocketmq-logger # priority: 402
- syslog # priority: 401
- udp-logger # priority: 400
- file-logger # priority: 399
- clickhouse-logger # priority: 398
#- log-rotate # priority: 100
# <- recommend to use priority (0, 100) for your custom plugins
- example-plugin # priority: 0
- aws-lambda # priority: -1899
- azure-functions # priority: -1900
- openwhisk # priority: -1901
- serverless-post-function # priority: -2000
- ext-plugin-post-req # priority: -3000
stream_plugins: # sorted by priority
- ip-restriction # priority: 3000
- limit-conn # priority: 1003
- mqtt-proxy # priority: 1000
# <- recommend to use priority (0, 100) for your custom plugins
#wasm:
#plugins:
#- name: wasm_log
#priority: 7999
#file: t/wasm/log/main.go.wasm
plugin_attr:
log-rotate:
interval: 3600 # rotate interval (unit: second)
max_kept: 168 # max number of log files will be kept
enable_compression: false # enable log file compression(gzip) or not, default false
skywalking:
service_name: APISIX
service_instance_name: APISIX Instance Name
endpoint_addr: http://127.0.0.1:12800
opentelemetry:
trace_id_source: x-request-id
resource:
service.name: APISIX
collector:
address: 127.0.0.1:4317
request_timeout: 3
request_headers:
Authorization: token
batch_span_processor:
drop_on_queue_full: false
max_queue_size: 1024
batch_timeout: 2
inactive_timeout: 1
max_export_batch_size: 16
prometheus:
export_uri: /apisix/prometheus/metrics
metric_prefix: apisix_
enable_export_server: true
export_addr:
ip: 127.0.0.1
port: 9091
server-info:
report_ttl: 60 # live time for server info in etcd (unit: second)
dubbo-proxy:
upstream_multiplex_count: 32
request-id:
snowflake:
enable: false
snowflake_epoc: 1609459200000 # the starting timestamp is expressed in milliseconds
data_machine_bits: 12 # data machine bit, maximum 31, because Lua cannot do bit operations greater than 31
sequence_bits: 10 # each machine generates a maximum of (1 << sequence_bits) serial numbers per millisecond
data_machine_ttl: 30 # live time for data_machine in etcd (unit: second)
data_machine_interval: 10 # lease renewal interval in etcd (unit: second)
proxy-mirror:
timeout: # proxy timeout in mirrored sub-request
connect: 60s
read: 60s
send: 60s