apisix/docs/en/latest/dns.md

title
DNS

• service discovery via DNS
  • SRV record

service discovery via DNS

Some service discovery system, like Consul, support exposing service information via DNS. Therefore we can use this way to discover service directly.

First of all, we need to configure the address of DNS servers:

# add this to config.yaml
discovery:
   dns:
     servers:
       - "127.0.0.1:8600"          # use the real address of your dns server

Unlike configurating domain in the Upstream's nodes field, service discovery via DNS will return all records. For example, with upstream configuration:

{
    "id": 1,
    "discovery_type": "dns",
    "service_name": "test.consul.service",
    "type": "roundrobin"
}

and test.consul.service be resolved as 1.1.1.1 and 1.1.1.2, this result will be the same as:

{
    "id": 1,
    "type": "roundrobin",
    "nodes": [
        {"host": "1.1.1.1", "weight": 1},
        {"host": "1.1.1.2", "weight": 1}
    ]
}

Note that all the IPs from test.consul.service share the same weight.

If a service has both A and AAAA records, A record is preferred.

If you want to specify the port for the upstream server, you can add it to the service_name:

{
    "id": 1,
    "discovery_type": "dns",
    "service_name": "test.consul.service:1980",
    "type": "roundrobin"
}

Another way to do it is via the SRV record, see below.

SRV record

By using SRV record you can specify the port and the weight of a service.

Assumed you have the SRV record like this:

; under the section of blah.service
A       300 IN      A     1.1.1.1
B       300 IN      A     1.1.1.2
B       300 IN      A     1.1.1.3
srv   86400 IN    SRV 10       60     1980 A
srv   86400 IN    SRV 10       20     1981 B

Upstream configuration like:

{
    "id": 1,
    "discovery_type": "dns",
    "service_name": "srv.blah.service",
    "type": "roundrobin"
}

is the same as:

{
    "id": 1,
    "type": "roundrobin",
    "nodes": [
        {"host": "1.1.1.1", "port": 1980, "weight": 60},
        {"host": "1.1.1.2", "port": 1981, "weight": 10},
        {"host": "1.1.1.3", "port": 1981, "weight": 10}
    ]
}

Note that two records of domain B split the weight evenly.

As for 0 weight SRV record, the RFC 2782 says:

Domain administrators SHOULD use Weight 0 when there isn't any server selection to do, to make the RR easier to read for humans (less noisy). In the presence of records containing weights greater than 0, records with weight 0 should have a very small chance of being selected.

We treat weight 0 record has a weight of 1 so the node "have a very small chance of being selected", which is also the common way to treat this type of record.

TODO: support priority.