apisix/conf/config.yaml

#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
apisix:
  node_listen: 9080              # APISIX listening port
  enable_heartbeat: true
  enable_admin: true
  enable_admin_cors: true         # Admin API support CORS response headers.
  enable_debug: false
  enable_dev_mode: false          # Sets nginx worker_processes to 1 if set to true
  enable_reuseport: true          # Enable nginx SO_REUSEPORT switch if set to true.
  enable_ipv6: true
  config_center: etcd             # etcd: use etcd to store the config value
                                  # yaml: fetch the config value from local yaml file `/your_path/conf/apisix.yaml`

  #proxy_protocol:                 # Proxy Protocol configuration
  #  listen_http_port: 9181        # The port with proxy protocol for http, it differs from node_listen and port_admin.
                                   # This port can only receive http request with proxy protocol, but node_listen & port_admin
                                   # can only receive http request. If you enable proxy protocol, you must use this port to
                                   # receive http request with proxy protocol
  #  listen_https_port: 9182       # The port with proxy protocol for https
  #  enable_tcp_pp: true           # Enable the proxy protocol for tcp proxy, it works for stream_proxy.tcp option
  #  enable_tcp_pp_to_upstream: true # Enables the proxy protocol to the upstream server

  proxy_cache:                     # Proxy Caching configuration
    cache_ttl: 10s                 # The default caching time if the upstream does not specify the cache time
    zones:                         # The parameters of a cache
    - name: disk_cache_one         # The name of the cache, administrator can be specify
                                   # which cache to use by name in the admin api
      memory_size: 50m             # The size of shared memory, it's used to store the cache index
      disk_size: 1G                # The size of disk, it's used to store the cache data
      disk_path: "/tmp/disk_cache_one" # The path to store the cache data
      cache_levels: "1:2"           # The hierarchy levels of a cache
  #  - name: disk_cache_two
  #    memory_size: 50m
  #    disk_size: 1G
  #    disk_path: "/tmp/disk_cache_two"
  #    cache_levels: "1:2"

  allow_admin:                  # http://nginx.org/en/docs/http/ngx_http_access_module.html#allow
    - 127.0.0.0/24              # If we don't set any IP list, then any IP access is allowed by default.
  #   - "::/64"
  # port_admin: 9180              # use a separate port

  # Default token when use API to call for Admin API.
  # *NOTE*: Highly recommended to modify this value to protect APISIX's Admin API.
  # Disabling this configuration item means that the Admin API does not
  # require any authentication.
  admin_key:
    -
      name: "admin"
      key: edd1c9f034335f136f87ad84b625c8f1
      role: admin                 # admin: manage all configuration data
                                  # viewer: only can view configuration data
    -
      name: "viewer"
      key: 4054f7cf07e344346cd3f287985e76a2
      role: viewer
  router:
    http: 'radixtree_uri'         # radixtree_uri: match route by uri(base on radixtree)
                                  # radixtree_host_uri: match route by host + uri(base on radixtree)
    ssl: 'radixtree_sni'          # radixtree_sni: match route by SNI(base on radixtree)
  # stream_proxy:                 # TCP/UDP proxy
  #   tcp:                        # TCP proxy port list
  #     - 9100
  #     - 9101
  #   udp:                        # UDP proxy port list
  #     - 9200
  #     - 9211
  # dns_resolver:                   # If not set, read from `/etc/resolv.conf`
  #  - 1.1.1.1
  #  - 8.8.8.8
  dns_resolver_valid: 30          # valid time for dns result 30 seconds
  resolver_timeout: 5             # resolver timeout
  ssl:
    enable: true
    enable_http2: true
    listen_port: 9443
    ssl_protocols: "TLSv1 TLSv1.1 TLSv1.2 TLSv1.3"
    ssl_ciphers: "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA256:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA"

nginx_config:                     # config for render the template to genarate nginx.conf
  error_log: "logs/error.log"
  error_log_level: "warn"         # warn,error
  worker_rlimit_nofile: 20480     # the number of files a worker process can open, should be larger than worker_connections
  event:
    worker_connections: 10620
  http:
    access_log: "logs/access.log"
    keepalive_timeout: 60s         # timeout during which a keep-alive client connection will stay open on the server side.
    client_header_timeout: 60s     # timeout for reading client request header, then 408 (Request Time-out) error is returned to the client
    client_body_timeout: 60s       # timeout for reading client request body, then 408 (Request Time-out) error is returned to the client
    send_timeout: 10s              # timeout for transmitting a response to the client.then the connection is closed
    underscores_in_headers: "on"   # default enables the use of underscores in client request header fields
    real_ip_header: "X-Real-IP"    # http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_header
    real_ip_from:                  # http://nginx.org/en/docs/http/ngx_http_realip_module.html#set_real_ip_from
      - 127.0.0.1
      - 'unix:'
    #lua_shared_dicts:              # add custom shared cache to nginx.conf
    #  ipc_shared_dict: 100m        # custom shared cache, format: `cache-key: cache-size`

etcd:
  host:                           # it's possible to define multiple etcd hosts addresses of the same etcd cluster.
    - "http://127.0.0.1:2379"     # multiple etcd address
  prefix: "/apisix"               # apisix configurations prefix
  timeout: 3                      # 3 seconds

plugins:                          # plugin list
  - example-plugin
  - limit-req
  - limit-count
  - limit-conn
  - key-auth
  - basic-auth
  - prometheus
  - node-status
  - jwt-auth
  - zipkin
  - ip-restriction
  - grpc-transcode
  - serverless-pre-function
  - serverless-post-function
  - openid-connect
  - proxy-rewrite
  - redirect
  - response-rewrite
  - fault-injection
  - udp-logger
  - wolf-rbac
  - proxy-cache
  - tcp-logger
  - proxy-mirror
  - kafka-logger
  - cors
  - batch-requests
stream_plugins:
  - mqtt-proxy