docsify/docs/index.html

230 lines
7.2 KiB
HTML
Raw Normal View History

2016-11-20 15:56:37 +08:00
<!DOCTYPE html>
<html lang="en">
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
<head>
<meta charset="UTF-8" />
<title>docsify</title>
<link rel="icon" href="_media/favicon.ico" />
<meta
name="google-site-verification"
content="6t0LoIeFksrjF4c9sqUEsVXiQNxLp2hgoqo0KryT-sE"
/>
<meta
name="keywords"
content="doc,docs,documentation,gitbook,creator,generator,github,jekyll,github-pages"
/>
<meta name="description" content="A magical documentation generator." />
<meta
name="viewport"
content="width=device-width, initial-scale=1.0, minimum-scale=1.0"
/>
<link
rel="stylesheet"
href="//cdn.jsdelivr.net/npm/docsify@4/lib/themes/vue.css"
title="vue"
/>
<link
rel="stylesheet"
href="//cdn.jsdelivr.net/npm/docsify@4/lib/themes/dark.css"
title="dark"
disabled
/>
<link
rel="stylesheet"
href="//cdn.jsdelivr.net/npm/docsify@4/lib/themes/buble.css"
title="buble"
disabled
/>
<link
rel="stylesheet"
href="//cdn.jsdelivr.net/npm/docsify@4/lib/themes/pure.css"
title="pure"
disabled
/>
<link
rel="stylesheet"
href="//cdn.jsdelivr.net/npm/docsify@4/lib/themes/dolphin.css"
title="dolphin"
disabled
/>
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
<style>
nav.app-nav li ul {
min-width: 100px;
}
2018-02-11 22:10:05 +08:00
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
#carbonads {
box-shadow: none !important;
width: auto !important;
}
</style>
</head>
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
<body>
<div id="app">Loading ...</div>
<script src="//cdn.jsdelivr.net/npm/docsify-plugin-carbon@1"></script>
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
<script>
// Set html "lang" attribute based on URL
const lang = location.hash.match(/#\/(de-de|es|ru-ru|zh-cn)\//);
if (lang) {
document.documentElement.setAttribute('lang', lang[1]);
}
// Docsify configuration
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
window.$docsify = {
alias: {
'.*?/awesome':
'https://raw.githubusercontent.com/docsifyjs/awesome-docsify/master/README.md',
'.*?/changelog':
'https://raw.githubusercontent.com/docsifyjs/docsify/master/CHANGELOG.md',
'/.*/_navbar.md': '/_navbar.md',
2021-02-05 04:46:07 +08:00
'/es/(.*)':
'https://raw.githubusercontent.com/docsifyjs/docs-es/master/$1',
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
'/de-de/(.*)':
'https://raw.githubusercontent.com/docsifyjs/docs-de/master/$1',
'/ru-ru/(.*)':
'https://raw.githubusercontent.com/docsifyjs/docs-ru/master/$1',
2021-02-05 04:46:07 +08:00
'/zh-cn/(.*)':
'https://cdn.jsdelivr.net/gh/docsifyjs/docs-zh@master/$1',
},
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
auto2top: true,
coverpage: true,
executeScript: true,
loadSidebar: true,
loadNavbar: true,
mergeNavbar: true,
maxLevel: 4,
subMaxLevel: 2,
ga: 'UA-106147152-1',
matomo: {
host: '//matomo.thunderwave.de',
id: 6,
},
name: 'docsify',
nameLink: {
'/es/': '#/es/',
'/de-de/': '#/de-de/',
'/ru-ru/': '#/ru-ru/',
'/zh-cn/': '#/zh-cn/',
'/': '#/',
},
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
search: {
noData: {
2021-02-05 04:47:17 +08:00
'/es/': '¡No hay resultados!',
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
'/de-de/': 'Keine Ergebnisse!',
2021-02-05 04:47:17 +08:00
'/ru-ru/': 'Никаких результатов!',
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
'/zh-cn/': '没有结果!',
'/': 'No results!',
},
paths: 'auto',
placeholder: {
2021-02-05 04:47:17 +08:00
'/es/': 'Buscar',
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
'/de-de/': 'Suche',
2021-02-05 04:47:17 +08:00
'/ru-ru/': 'Поиск',
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
'/zh-cn/': '搜索',
'/': 'Search',
},
pathNamespaces: ['/es', '/de-de', '/ru-ru', '/zh-cn'],
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
},
vueComponents: {
'button-counter': {
template: /* html */ `<button @click="count += 1">You clicked me {{ count }} times</button>`,
data() {
return {
count: 0,
};
},
},
},
vueGlobalOptions: {
data() {
return {
count: 0,
message: 'Hello, World!',
2020-10-21 06:45:34 +08:00
// Fake API response
images: [
{ title: 'Image 1', url: 'https://picsum.photos/150?random=1' },
{ title: 'Image 2', url: 'https://picsum.photos/150?random=2' },
{ title: 'Image 3', url: 'https://picsum.photos/150?random=3' },
],
};
},
2020-10-21 06:45:34 +08:00
computed: {
timeOfDay() {
2020-10-21 06:45:34 +08:00
const date = new Date();
const hours = date.getHours();
if (hours < 12) {
return 'morning';
} else if (hours < 18) {
return 'afternoon';
} else {
return 'evening';
}
},
},
methods: {
hello() {
alert(this.message);
},
},
},
vueMounts: {
'#counter': {
data() {
return {
count: 0,
};
},
},
},
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
plugins: [
DocsifyCarbon.create('CEBI6KQE', 'docsifyjsorg'),
function (hook, vm) {
hook.beforeEach(html => {
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
if (/githubusercontent\.com/.test(vm.route.file)) {
url = vm.route.file
.replace('raw.githubusercontent.com', 'github.com')
.replace(/\/master/, '/blob/master');
} else if (/jsdelivr\.net/.test(vm.route.file)) {
url = vm.route.file
.replace('cdn.jsdelivr.net/gh', 'github.com')
.replace('@master', '/blob/master');
} else {
url =
'https://github.com/docsifyjs/docsify/blob/develop/docs/' +
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
vm.route.file;
}
const editHtml = '[:memo: Edit Document](' + url + ')\n';
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
return (
editHtml +
html +
'\n\n----\n\n' +
'<a href="https://docsify.js.org" target="_blank" style="color: inherit; font-weight: normal; text-decoration: none;">Powered by docsify</a>'
);
});
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
},
],
};
</script>
<script src="//cdn.jsdelivr.net/npm/docsify@4/lib/docsify.min.js"></script>
<script src="//cdn.jsdelivr.net/npm/docsify@4/lib/plugins/search.min.js"></script>
<script src="//cdn.jsdelivr.net/npm/prismjs@1/components/prism-bash.min.js"></script>
<script src="//cdn.jsdelivr.net/npm/prismjs@1/components/prism-markdown.min.js"></script>
<script src="//cdn.jsdelivr.net/npm/prismjs@1/components/prism-nginx.min.js"></script>
<script src="//cdn.jsdelivr.net/npm/prismjs@1/components/prism-php.min.js"></script>
<script>
// Public site only
if (/docsify/.test(location.host)) {
document.write(
'<script src="//cdn.jsdelivr.net/npm/docsify@4/lib/plugins/ga.min.js"><\/script>'
);
document.write(
'<script src="//cdn.jsdelivr.net/npm/docsify@4/lib/plugins/matomo.min.js"><\/script>'
);
}
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
</script>
<script src="//cdn.jsdelivr.net/npm/vue@2/dist/vue.min.js"></script>
<!-- <script src="//cdn.jsdelivr.net/npm/vue@3/dist/vue.global.prod.js"></script> -->
Jest + Playwright Testing (#1276) * Initial Jest+Playwright setup * Fix eslint warnings * Add placeholder for common options * Fix load order of scriptURLs * Add docsifyURL and waitForSelector options * Add executeScript scenarios * Enable firefox and webkit tests by default * Prevent prettier from reformatting browsers list * Update options and add JSDoc comments * Initial commit * Complete initial example tests * Minor tweaks * Change suite name * Rename file * Add npm script to run jest+playwright example test * Clean up server properties * Isolate e2e, integration, and unit test environments - Setup projects for e2e, integration, and unit tests in Jest configuration - Setup /tests/e2e/ tests for Jest+PlayWright - Setup /tests/integration/ tests for Jest - Setup /tests/unit/ tests for Jest - Setup eslint for Jest and Jest+Playwright environments - Move e2e configuration files into separate folder - Update e2e example tests - Update unit example tests - Update HTML fixtures * Update docsifyInit helper - Add `debug` option - Append `Markdown` suffix to markdown-related options - Reorder options alphabetically * Add jestPlaywright.debug() to e2e examples * Removed need to pass page as arg to docsifyInit() * Add VSCode debug configurations * Change test server port from 8080 to 3001 * Clean up test names and expect() order * Update npm scripts to ignore example tests * Add CLI commands and resources section * Add Jest unit test snapshot example * Added Jest unit and e2e tests to Github workflows * Add npm script to run Jest examples Added for new devs who are exploring the examples, as the need for passing --testPathIgnorePatterns is not obvious. This flag is required because the example tests are excluded by default. * Remove node 10.x and add 14.x from tests Required for jest+playwright testitng * Temporarily disable testPathIgnorePatterns for ci * Temporarily remove node 14 from matrix Cypress fails on node 14.x * Alternate workflow setup for new test env * Update workflow platforms and node versions Also cleaning up naming * Restoring original workflow names * Remove Cypress tests * Remove/Reset GitHub actions * Restore/reset workflows * Bump actions/checkout@v1 to v2 * Use playright GH action * Update playwright GH action configuration * Remove unnecessary steps and update checkout version * Add install step * Add --ignore-scripts flag Linting does not require running scripts automatically executred after install. * Swicth from ci to i for install * Add new Build & Test workflow * Add OS tests * Wait for network idle for more reliable ready state * Configure image snapshot testing and add example * Remove example fixture file * Adjust image snapshot threshold for local & CI tests * Upload diff-output artifact * Add failure() check to upload-artifact * Bump image snapshot threshold for local & CI tests * Set diffDirection * Fix XHR caching in playwright tests * Update image snapshot example and theshold * Bump image snapshot threshold for local & CI tests * Remove old workflows * Bump image snapshot threshold for local & CI tests * Bump image snapshot failureThreshold for local & CI tests * Set failureThresholdType to percent * Change image snapshot comparisonMethod to ssim * Remove pixelMatch options (incompatible with ssim) * Bump image snapshot failureThreshold * Bump image snapshot failureThreshold * Disable fast-fail to allow all checks to complete * Rename workflow * Disable fast-fail to allow all checks to complete * Store pixel and ssim comparison configs * Add link to image snapshot test * Fix CI errors on Windows due to image size mismatch * Attempt to fix macos e2e exit code 134 issue * Update test.yml * Update test.yml * Update test.yml * Fix --ci flag * Set Jets to use --runInBand for macOS e2e * Remove unnecessary macOS check * Set image snapshot to runInProcess (macOS CI fix) * Update test.yml * Temporary failureThreshold change for debugging * Upload os+node-specific diff artifacts * Remove node version from diff artifact * Revert "Remove node version from diff artifact" This reverts commit 9cfcc4342bb22f18da30363a4c52758f13ba0cc9. * Revert "Revert "Remove node version from diff artifact"" This reverts commit ad6c1891e48c70c9973a5c0d7b876b2d4621f3b9. * Restoring failureThreshold after debugging * Remove runInProcess option * Revert "Remove runInProcess option" This reverts commit 667ed6c870fc56f0349fc5eccc2cdeead3eff4ea. * Add node-specific artifact uploads * Set ssim mode to fast and restore runInProcess * Set failureThreshold to 0.01 * Updating to playwright@next for webkit fix * Restore optimal ssim configuration * Testing pixel vs. ssim image comparison * Move shared test setup to unit/int/e2e setups * Refactor test server setup * Replace live-server with browser-sync * Update script for running local docs site - Only init GA plugin on public site - Only init Gitter plugin on public site - Only init Matomo plugin on public site NOTE: Large diff is a result of initial Prettier formatting. Actual change limited to last <script> block on page. * Allow launching test server preview with --start * Add integration tests and refactor unit + e2e * Unify docsifyInit() and cleanup - Create unified docsifyInit() for jest and playwright - Move shared helpers to /tests/helpers - Update tests - Update globals * Fixed webkit routes by specifying ContentType * Update snapshot * Update dependencies * Update tests to use unified docsifyInit() * Remove Cypress (old e2e test environment) * Update tests to run (unit/integration/e2e) - Add new integration tests (Jest) - Remove old unit tests (mocha+jsdom) - Remove old e2e tests (Cypress) * Remove Cypress-related dependency * Remove mocha+chai+jsdom (old unit/int test env) * Rename testing directories and scripts - Rename /tests/ directory to /test/ - Rename script/task names by removing “jest” identifier - Remove “test:jest-examples” script * - Configure test server for availability with all tests (previously e2e only) - Create identical docsifyInit() tests using Jest (integration) and Playwright (e2e) - Update docsifyInit() to convert relative URLs to absolute URLs to work in both JSDOM and Playwright - Update docsifyInit() to append style- and js-related tags using createElement instead of insertAdjacentHTML - Update paths in test files to use unified docsifyInit() - Added option to docsifyInit() to enable/disable formatted HTML output to console - Removed vue.css as default docsify theme from docsifyInit() - Removed outdated files * Reorganize test files * Fix basePath option * Replace do-mock-ajax with xhr-mock - Allows mocking all XMLHttpRequests instead of just those initiated via /src/core/fetch/ajax.js - Allows JSDOM tests to use /lib/docsify.js instead of /src/core/index.js (same as Playwright tests) - Allows JSDOM tests to use /docs site as test content * Added new waitFor helpers * Clean up globals - Import globals from various files instead of manually adding them to ensure they are availability in Jest and eslint configurations - Add middleware to server configuration for serving virtual “_blank.html” file - Add BLANK_URL - Rename TEST_URL to TEST_HOST - Removed ./test/fixtures/ directory (blank page now served via server.js middleware) - Added page.goto(BLANK_URL) call to global Playwright beforeEach() setup * Add try/catch for waitForFunction callback * Move playwright config into jest.config.js * Add runInBand option to tests for reliability * Remove unnecessary XHR Mock teardown * Add —runInBand to test script * Merge develop * Cleanup - Relocate carbon plugin script with other scripts - Update zh-cn docs URL to align with other translatins (GitHub, not jsdelivr) - Add major version locks to URLs * Removed fixed host value from docs * Updated test after merge (docsify version change) * Added startPath for manual instance * Remove Node 10 from CI tests * Remove Node 10 from CI lint tests
2020-10-06 03:10:30 +08:00
</body>
2018-05-02 22:38:34 +08:00
</html>