milvus/core/CMakeLists.txt

213 lines
8.0 KiB
CMake
Raw Normal View History

#-------------------------------------------------------------------------------
# Copyright (C) 2019-2020 Zilliz. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software distributed under the License
# is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
# or implied. See the License for the specific language governing permissions and limitations under the License.
#-------------------------------------------------------------------------------
cmake_minimum_required( VERSION 3.14 )
add_definitions(-DELPP_THREAD_SAFE)
set(CMAKE_POSITION_INDEPENDENT_CODE ON)
message( STATUS "Building using CMake version: ${CMAKE_VERSION}" )
set( CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_CURRENT_SOURCE_DIR}/cmake" )
include( Utils )
# **************************** Build time, type and code version ****************************
get_current_time( BUILD_TIME )
message( STATUS "Build time = ${BUILD_TIME}" )
get_build_type( TARGET BUILD_TYPE
DEFAULT "Release" )
message( STATUS "Build type = ${BUILD_TYPE}" )
get_milvus_version( TARGET MILVUS_VERSION
DEFAULT "0.10.0" )
message( STATUS "Build version = ${MILVUS_VERSION}" )
get_last_commit_id( LAST_COMMIT_ID )
message( STATUS "LAST_COMMIT_ID = ${LAST_COMMIT_ID}" )
#configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/src/version.h.in
# ${CMAKE_CURRENT_SOURCE_DIR}/src/version.h @ONLY )
# unset(CMAKE_EXPORT_COMPILE_COMMANDS CACHE)
set( CMAKE_EXPORT_COMPILE_COMMANDS ON )
# **************************** Project ****************************
project( milvus VERSION "${MILVUS_VERSION}" )
set( CMAKE_CXX_STANDARD 17 )
set( CMAKE_CXX_STANDARD_REQUIRED on )
set( MILVUS_SOURCE_DIR ${PROJECT_SOURCE_DIR} )
set( MILVUS_BINARY_DIR ${PROJECT_BINARY_DIR} )
set( MILVUS_ENGINE_SRC ${PROJECT_SOURCE_DIR}/src )
set( MILVUS_THIRDPARTY_SRC ${PROJECT_SOURCE_DIR}/thirdparty )
# This will set RPATH to all excutable TARGET
# self-installed dynamic libraries will be correctly linked by excutable
set( CMAKE_INSTALL_RPATH "/usr/lib" "${CMAKE_INSTALL_PREFIX}/lib" )
set( CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE )
# **************************** Dependencies ****************************
include( CTest )
include( BuildUtils )
include( DefineOptions )
include( ExternalProject )
include( FetchContent )
include_directories(thirdparty)
set( FETCHCONTENT_BASE_DIR ${MILVUS_BINARY_DIR}/3rdparty_download )
set(FETCHCONTENT_QUIET OFF)
include( ThirdPartyPackages )
find_package(OpenMP REQUIRED)
# **************************** Compiler arguments ****************************
message( STATUS "Building Milvus CPU version" )
#append_flags( CMAKE_CXX_FLAGS
# FLAGS
# "-fPIC"
# "-DELPP_THREAD_SAFE"
# "-fopenmp"
# "-Werror"
# )
# **************************** Coding style check tools ****************************
find_package( ClangTools )
set( BUILD_SUPPORT_DIR "${CMAKE_SOURCE_DIR}/build-support" )
message(STATUS "CMAKE_SOURCE_DIR is at ${CMAKE_SOURCE_DIR}" )
if("$ENV{CMAKE_EXPORT_COMPILE_COMMANDS}" STREQUAL "1" OR CLANG_TIDY_FOUND)
# Generate a Clang compile_commands.json "compilation database" file for use
# with various development tools, such as Vim's YouCompleteMe plugin.
# See http://clang.llvm.org/docs/JSONCompilationDatabase.html
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
endif()
#
# "make lint" target
#
if ( NOT MILVUS_VERBOSE_LINT )
set( MILVUS_LINT_QUIET "--quiet" )
endif ()
if ( NOT LINT_EXCLUSIONS_FILE )
# source files matching a glob from a line in this file
# will be excluded from linting (cpplint, clang-tidy, clang-format)
set( LINT_EXCLUSIONS_FILE ${BUILD_SUPPORT_DIR}/lint_exclusions.txt )
endif ()
find_program( CPPLINT_BIN NAMES cpplint cpplint.py HINTS ${BUILD_SUPPORT_DIR} )
message( STATUS "Found cpplint executable at ${CPPLINT_BIN}" )
#
# "make lint" targets
#
add_custom_target( lint
${PYTHON_EXECUTABLE} ${BUILD_SUPPORT_DIR}/run_cpplint.py
--cpplint_binary ${CPPLINT_BIN}
--exclude_globs ${LINT_EXCLUSIONS_FILE}
--source_dir ${CMAKE_CURRENT_SOURCE_DIR}
${MILVUS_LINT_QUIET}
)
#
# "make clang-format" and "make check-clang-format" targets
#
if ( ${CLANG_FORMAT_FOUND} )
# runs clang format and updates files in place.
add_custom_target( clang-format
${PYTHON_EXECUTABLE} ${BUILD_SUPPORT_DIR}/run_clang_format.py
--clang_format_binary ${CLANG_FORMAT_BIN}
--exclude_globs ${LINT_EXCLUSIONS_FILE}
--source_dir ${CMAKE_CURRENT_SOURCE_DIR}/src
--fix
${MILVUS_LINT_QUIET} )
# runs clang format and exits with a non-zero exit code if any files need to be reformatted
add_custom_target( check-clang-format
${PYTHON_EXECUTABLE} ${BUILD_SUPPORT_DIR}/run_clang_format.py
--clang_format_binary ${CLANG_FORMAT_BIN}
--exclude_globs ${LINT_EXCLUSIONS_FILE}
--source_dir ${CMAKE_CURRENT_SOURCE_DIR}/src
${MILVUS_LINT_QUIET} )
endif ()
#
# "make clang-tidy" and "make check-clang-tidy" targets
#
if ( ${CLANG_TIDY_FOUND} )
# runs clang-tidy and attempts to fix any warning automatically
add_custom_target( clang-tidy
${PYTHON_EXECUTABLE} ${BUILD_SUPPORT_DIR}/run_clang_tidy.py
--clang_tidy_binary ${CLANG_TIDY_BIN}
--exclude_globs ${LINT_EXCLUSIONS_FILE}
--compile_commands ${CMAKE_BINARY_DIR}/compile_commands.json
--source_dir ${CMAKE_CURRENT_SOURCE_DIR}/src
--fix
${MILVUS_LINT_QUIET} )
# runs clang-tidy and exits with a non-zero exit code if any errors are found.
add_custom_target( check-clang-tidy
${PYTHON_EXECUTABLE} ${BUILD_SUPPORT_DIR}/run_clang_tidy.py
--clang_tidy_binary ${CLANG_TIDY_BIN}
--exclude_globs ${LINT_EXCLUSIONS_FILE}
--compile_commands ${CMAKE_BINARY_DIR}/compile_commands.json
--source_dir ${CMAKE_CURRENT_SOURCE_DIR}/src
${MILVUS_LINT_QUIET} )
endif ()
#
# Validate and print out Milvus configuration options
#
config_summary()
# **************************** Source files ****************************
add_subdirectory( thirdparty )
add_subdirectory( src )
# Unittest lib
if ( BUILD_UNIT_TEST STREQUAL "ON" )
if ( BUILD_COVERAGE STREQUAL "ON" )
append_flags( CMAKE_CXX_FLAGS
FLAGS
"-fprofile-arcs"
"-ftest-coverage"
)
endif ()
append_flags( CMAKE_CXX_FLAGS FLAGS "-DELPP_DISABLE_LOGS")
add_subdirectory( ${CMAKE_CURRENT_SOURCE_DIR}/unittest )
endif ()
add_custom_target( Clean-All COMMAND ${CMAKE_BUILD_TOOL} clean )
# **************************** Install ****************************
if ( NOT MILVUS_DB_PATH )
set( MILVUS_DB_PATH "${CMAKE_INSTALL_PREFIX}" )
endif ()
set( GPU_ENABLE "false" )
install(
DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/src/dog_segment/
DESTINATION ${CMAKE_CURRENT_SOURCE_DIR}/include
FILES_MATCHING PATTERN "*_c.h"
)
install(FILES ${CMAKE_BINARY_DIR}/src/dog_segment/libmilvus_dog_segment.so
DESTINATION ${CMAKE_CURRENT_SOURCE_DIR}/lib)