Cherry pick from master
pr: #33064#33101#33187#33259#33224#33064 Support readable JSON file import for
Float16/BFloat16/SparseFloat
#33101 Store SparseFloatVector into parquet as JSON string
#33187 Fix SparseFloatVector data parse error for parquet
#33259 Fix SparseFloatVector data parse error for json
#33224 Optimize bulk insert unittest
Signed-off-by: Cai Yudong <yudong.cai@zilliz.com>
1. use a small warmup pool to reduce the impact of warmup
2. change the warmup pool to nonblocking mode
3. disable warmup by default
4. remove the maximum size limit of 16 for the load pool
issue: https://github.com/milvus-io/milvus/issues/32772
pr: https://github.com/milvus-io/milvus/pull/33348
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Co-authored-by: xiaofanluan <xiaofan.luan@zilliz.com>
pr: #33301
when milvus process delete record, it need to find record's corresponded
segment by bloom filter, and higher bloom filter fp rate will cause
delete record forwards to wrong segments.
This PR Decrease bloom filter's default fp to 0.001.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #33243
pr: #33244
1. fix: the panic when db isn't existed in the rate limit interceptor
#33244
2. enhance: check the auth in some rest v2 api #33256
---------
Signed-off-by: SimFG <bang.fu@zilliz.com>
Cherry-pick from master
pr: #33123#33158
See also #33122
This pr add param item `mq.ignoreBadPosition` to control behavior when
mq failed to parse message id from checkpoint
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #32206, #32801
- search failure with some assertion, segment not loaded and resource
insufficient.
- segment leak when query segments
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #32910
* split replica's node list to channels when create replicas
* balance nodes among channels when node change happens
* implement channel level balance, let balance happens in channel level
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #32748
This PR:
- Add `metautil.Channel` utiltiy which convert virtual name to physical
channel name, collectionID and shard idx
- Add channel mapper interface & implementation to convert limited
physical channel name into int index
- Apply `metautil.Channel` filter in querynode segment manager logic
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #32663
- Use new param to control request resource timeout for lazy load.
- Remove the timeout parameter of `Do`, remove `DoWait`. use `context`
to control the timeout.
- Use `VersionedNotifier` to avoid notify event lost and broadcast,
remove the redundant goroutine in cache.
related dev pr: #32684
Signed-off-by: chyezh <chyezh@outlook.com>
Related to #32598
Use `WithBlock` may fail fast when create etcd client to some invalid
etcd endpoints and make it easier to check problem.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
related to #32165
1. for all the manager, support collection level index
2. remove collection level filter to avoid extra cpu usage when
collection number increases
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
issue: #19095,#29655,#31718
- Change `ListWithPrefix` to `WalkWithPrefix` of OOS into a pipeline
mode.
- File garbage collection is performed in other goroutine.
- Segment Index Recycle clean index file too.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #29419
added helper functions to parse JSON representation of sparse float
vectors, will be used by both the restful server and the import utils.
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
https://github.com/milvus-io/milvus/issues/32321
Issue Description:
Tracing is an important means of identifying bottleneck points in a
system and is crucial for debugging production issues. Milvus(or any DB)
is generally the most downstream system for an user call -- a user call
can originate from UI and pass through multiple components, in
micro-services architecture, before reaching Milvus.
So, when an user experiences a glitch, one would debug the call trace
via logs using a common trace id. As of now, Milvus generates a new
trace id for every call and this request is to make sure client can pass
the trace id which will be used for all the logs across the Milvus
sub-components so that one can fetch logs for a user call across the
components -- including Milvus.
Signed-off-by: Shreesha Srinath Madogaran <smadogaran@salesforce.com>
Co-authored-by: Shreesha Srinath Madogaran <smadogaran@salesforce.com>
issue: #30647
- Add declarative resource group api
- Add config for resource group management
- Resource group recovery enhancement
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #29892
This PR:
1. Move the process of gathering materialized search info to when the
search plan is created, before it goes to each segment, to avoid
repeated work and access the plan node under multi-threaded
circumstances.
2. Enforce the supported MV type to `VARCHAR`
3. Add integration test
Signed-off-by: Patrick Weizhi Xu <weizhi.xu@zilliz.com>
fix https://github.com/milvus-io/milvus/issues/32059
this pr fix two issues:
offset is not handled correctly without specify a limit
reduceStopForBest doesn't guarantee to return limit result even if there
are more result when there is small segment
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
Use an individual buffer size parameter for imports and set buffer size
to 64MB.
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
See #31944
There is deadlock in concurrent invocation on `cache.DoWait()`. Suppose
2 callers are calling `DoWait` concurrently, the notification for cache
wait queue may be limited to just 1 caller's occupation instead of them
combined.
To fix this issue, this patch is trying to notify all waiters in queue.
Signed-off-by: Ted Xu <ted.xu@zilliz.com>
issue: #30647
- ReplicaManager manage read only node now, and always do persistent of
node distribution of replica.
- All segment/channel checker using ReplicaManager to get read-only node
or read-write node, but not ResourceManager.
- ReplicaManager promise that only apply unique querynode to one replica
in same collection now (replicas in same collection never hold same
querynode at same time).
- ReplicaManager promise that fairly node count assignment policy if
multi replicas of collection is assigned to one resource group.
- Move some parameters check into ReplicaManager to avoid data race.
- Allow transfer replica to resource group that already load replica of
same collection
- Allow transfer node between resource groups that load replica of same
collection
---------
Signed-off-by: chyezh <chyezh@outlook.com>
Feature Introduced:
1. Ensure ImportV2 waits for the index to be built
Enhancements Introduced:
1. Utilization of local time for timeout ts instead of allocating ts
from rootcoord.
3. Enhanced input file length check for binlog import.
4. Removal of duplicated manager in datanode.
5. Renaming of executor to scheduler in datanode.
6. Utilization of a thread pool in the scheduler in datanode.
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Fix etcd config source didn't respect auth enabled
Also removed pulsar recoverable error when pulsar return ConsumerBusy.
It could happen that pulsar didn't find the original consumer is dead
and recover takes some time.
fix#31631
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
issue: #29261
This PR Add restful api for devops to execute rolling upgrade, including
suspend/resume balance and manual transfer segments/channels.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
The max number of import files per request should not exceed 1024 by
default (configurable).
The import file size allowed for importing should not exceed 16GB by
default (configurable).
issue: https://github.com/milvus-io/milvus/issues/28521
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #29892
This PR
1. Pass Materialized View (MV) search information obtained from the
expression parsing planning procedure to Knowhere. It only performs when
MV is enabled and the partition key is involved in the expression. The
search information includes:
1. Touched field_id and the count of related categories in the
expression. E.g., `color == red && color == blue` yields `field_id ->
2`.
2. Whether the expression only includes AND (&&) logical operator,
default `true`.
3. Whether the expression has NOT (!) operator, default `false`.
4. Store if turning on MV on the proxy to eliminate reading from
paramtable for every search request.
5. Renames to MV.
## Rebuttals
1. Did not write in `ExtractInfoPlanNodeVisitor` since the new scalar
framework was introduced and this part might be removed in the future.
2. Currently only interested in `==` and `in` expression, `string` data
type, anything else is a bonus.
3. Leave handling expressions like `F == A || F == A` for future works
of the optimizer.
## Detailed MV Info
Signed-off-by: Patrick Weizhi Xu <weizhi.xu@zilliz.com>
/kind improvement
fix: #31272
This pr add more metrics, which are:
- Slow query count, which the duration considered as slow can be
configurable;
- Number of deleted entities;
- Number of entities imported;
- Number of entities per collection;
- Number of loaded entities per collection;
- Number of indexed entities;
- Number of indexed entities, per collection, per index and whether it's
a vetor index;
- Quota states (LongTimeTickDelay, MemoryExhuasted, DiskQuotaExhuasted)
per database;
---------
Signed-off-by: longjiquan <jiquan.long@zilliz.com>
See also #31362
This PR make datacoord garbage collection scan operation using differet
interval than other opeartion.
This interval is a newly added param item, which default value is 7*24
hours.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
didn't mark the compact as failure if it's simply an rpc error when
GetCompactionPlansResults
see #31352
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
During requery, segments may change (e.g., due to compaction), so we
need to return specific error codes when encountering incomplete requery
results. Clients can then retry to avoid this issue.
issue: https://github.com/milvus-io/milvus/issues/29656
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #30647
- ContextCond is a broadcast-only condition variable which can be
canceled by context.
- VersionedNotifier is a version-based notifier-listener implementation,
which promise no change can be ignored.
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #31222
grpcclient's `call` func return a unrecoverable error, then the caller's
retry policy also breaks due to this unrecoverable error.
This PR introduce `retry.Handle`, the new func use `func() (bool,
error)` as input parameters, which return `shouldRetry` directly, to
avoid grpcclient return a unrecoverable error
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
add sparse float vector support to different milvus components,
including proxy, data node to receive and write sparse float vectors to
binlog, query node to handle search requests, index node to build index
for sparse float column, etc.
https://github.com/milvus-io/milvus/issues/29419
---------
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
issue: #30816
cause balance channel will stuck until leader view catch up the current
target, then start to unsub the old delegator. which make sure that the
new delegator can provide search before release old delegator. but
another logic in segment_checker skip loading segment during balance
channel. so during balance channel, if query node crash, new delegator
can't catch up target forever, then stuck forever.
This PR remove the rule that skip loading segment during balance channel
to avoid the logic dead lock here.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
