issue: #32466
this PR enhance that when shard location changed, update proxy's shard
leader cache. in case of query node failover case, proxy can find
replica recover
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
related to #32165
1. for all the manager, support collection level index
2. remove collection level filter to avoid extra cpu usage when
collection number increases
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
issue: #30647
- Remove error report if there's no query node serve. It's hard for
programer to use it to do resource management.
- Change resource group `transferNode` logic to keep compatible with old
version sdk.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
See also #32165
Add segment dist and leader view filter criterion struct to store
frequent filter conditions.
Add collection/channel filter results for these two meta
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #32165
Change `SegmentDistFilter` to interface in order to provde node index
when filter segment dist.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #32165
Change `LeaderViewFilter` to interface to provided map key to avoid
iterating all key-values in LeaderViewManager
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #31632
Release conc.Pool after usage to clean worker and stop background purge
and ticktock.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30647
- Same dst and src resource group should not be allowed in
`TransferReplica` and `TransferNode`.
- Remove redundant parameter check.
Signed-off-by: chyezh <chyezh@outlook.com>
Related to https://github.com/milvus-io/milvus/issues/32165
Avoid iterating through all replicas/collections if possible. Iteration
is expensive when there are large number of replicas/collections.
Signed-off-by: yiwangdr <yiwangdr@gmail.com>
Related to #32165
Add collection to partitionIDs mapping to avoid interation on all
partitions loaded when trying to get all partitions with collection id
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30647
- Add declarative resource group api
- Add config for resource group management
- Resource group recovery enhancement
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #31091
This PR add GetByFilter interface in leader view manager, instead of all
kind of get func
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #30647
- ReplicaManager manage read only node now, and always do persistent of
node distribution of replica.
- All segment/channel checker using ReplicaManager to get read-only node
or read-write node, but not ResourceManager.
- ReplicaManager promise that only apply unique querynode to one replica
in same collection now (replicas in same collection never hold same
querynode at same time).
- ReplicaManager promise that fairly node count assignment policy if
multi replicas of collection is assigned to one resource group.
- Move some parameters check into ReplicaManager to avoid data race.
- Allow transfer replica to resource group that already load replica of
same collection
- Allow transfer node between resource groups that load replica of same
collection
---------
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #31091
This PR add GetByFilter interface in channel dist manager, instead of
all kind of get func
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #29261
This PR Add restful api for devops to execute rolling upgrade, including
suspend/resume balance and manual transfer segments/channels.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #28491#31240
When colleciton number is large, querycoord saves collection target one
by one, which is slow and may block querycoord exits.
In local run, 500 collections scenario may lead to about 40 seconds
saving collection targets.
This PR changes the `SaveCollectionTarget` interface into batch one and
organizes the collection in 16 per bundle batches to accelerate this
procedure.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
"-1" as `InvalidPartitionID` previously used as All partition place
holder in delete cases. It's confusing and hard to maintain when a const
var has more than one meaning.
This PR add `AllPartitionsID` to replace these usages in delete
scenarios.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #31162
when give scope CurrentTargetFirst/NextTargetFirst, it's expected to
scan both current and next target.
This PR fixed wrong behavior of CurrentTargetFirst/NextTargetFirst in
target manager, which may cause unexpected task generated, and load
collection may stuck forever due to dirty leader view.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #28491
after querycoord restart, it will pull a new target, which include
channel and segment list. when segments loaded on querynode has reached
the target, the collection could provide search/query. but if segment
list changes by time, ater querycoord pull a new target, it will takes a
few minutes to catch up the target's segment distribution. and before
that, query/search will fail due to lack of segments.
This PR save the current loaded target to meta storein querycoord's stop
progress, and recover it when query coord starts, to speed up the target
recovery time.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #31103
Since querycoord need index meta information from datacoord only, broker
shall use `ListIndexes` to skip segment index building check logic in
datacoord
This PR is also related to #30538, in which DescribeIndex caused lots of
memory usage and lead to OOM eventually
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30553
when datacoord with version 2.2 and querycoord with version 2.3 coexist
during rolling upgrade, `DescribeIndex/GetIndexInfo` will return
`unimplemented` error
This PR add retry on `DescribeIndex/GetIndexInfo`, to prevent load
collection failed during rolling upgrade from milvus 2.2 to 2.3.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
don't store logPath in meta to reduce memory, when service get
segmentinfo, generate logpath from logid.
#28885
Signed-off-by: lixinguo <xinguo.li@zilliz.com>
Co-authored-by: lixinguo <xinguo.li@zilliz.com>
the recent changes move the level 0 segments list to a new proto field,
which leads to the QueryCoord can't see the level 0 segments, handle the
new changes
fix#29907
Signed-off-by: yah01 <yang.cen@zilliz.com>
See also #29803
This PR:
- Add trace span for collection/partition load
- Use TraceSpan to generate Segment/ChannelTasks when loading
- Refine BaseTask trace tag usage
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Related to #29575
Add `getCollectionTarget` method which is atomic when scope is
`CurrentTargetFirst` or `NextTargetFirst`
Also return error when executor finds no channel in target manager
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
milvus branch 2.3 add `loadType` in CollectionLoadInfo, so for
collection meta upgrade from 2.2, we should add `loadType` to
CollectionLoadInfo. This PR update CollectionLoadInfo with `loadType`
when meet a old version CollectionLoadInfo
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #28622
After we support balance segment with growing segment count #28623, if
we balance segment and channel at same time, some segments need to be
rebalanced after balance channel finish.
This PR skip balance segment when channel need be balanced.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
the incorrect filter causes all LevelZero segment filtered, so the
deleted entities may be still visible
related: #27349
Signed-off-by: yah01 <yah2er0ne@outlook.com>
issue: #28622
query node with delegator will has more rows than other query node due
to delgator loads all growing rows.
This PR enable the balance segment which based on the num of growing
rows in leader view.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #28332
during querycoord's recover, it try to call `DescribeCollection` and
`ShowPartitions` to root coord, to checker whether collection or
partition has been released in rootcoord. but if rootcoord isn't not
ready yet, the rpc will fail, the querycoord panic.
to fix this, we remove rpc call during querycoord's start
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
- Add log.Ctx(ctx) for all log occurences
- Use `merr.CheckRPCErr` for all grpc response error handling
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
