1. Move the common modules of streamingNode and dataNode to flushcommon
2. Add new GetVChannels interface for rootcoord
issue: https://github.com/milvus-io/milvus/issues/33285
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
This PR removes the dependency of compaction on the ID allocator by
pre-allocating the logID and segmentID.
issue: https://github.com/milvus-io/milvus/issues/33957
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
The import is dependent on syncTask, which in turn relies on the
allocator. This PR pre-allocate the necessary IDs for import syncTask.
issue: https://github.com/milvus-io/milvus/issues/33957
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Check if the segment exists during FlushSegments and add some key logs
in write path.
issue: https://github.com/milvus-io/milvus/issues/34255
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Correct the update logic of timerecorder in the flowgraph to avoid false
failure: "some node(s) haven't received input".
issue: https://github.com/milvus-io/milvus/issues/34337
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Related to #33716
This PR add context param in SyncTask.Run execution functions to make it
cancellable from the caller.
This make it possible to cancel task when datanode/data sync service is
beeing shut down.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
1. Remove the `compactTo` field in `SegmentInfo`.
2. Remove the target segment not match and its retry logic in
`SyncManager`.
issue: https://github.com/milvus-io/milvus/issues/32809
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #33540
1. gorwing L0 segments is invisible to datacoord.
2. flushed L0 segments need to clean by datacoord.
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
Due to the removal of injection and syncSegments from the compaction, we
need to ensure that no compaction is successfully executed during the
rolling upgrade. This PR renames Compaction to CompactionV2, with the
following effects:
- New datacoord + old datanode: Utilizes the CompactionV2 interface,
resulting in the datanode error "CompactionV2 not implemented," causing
compaction to fail;
- Old datacoord + new datanode: Utilizes the CompactionV1 interface,
resulting in the datanode error "CompactionV1 not implemented," causing
compaction to fail.
issue: https://github.com/milvus-io/milvus/issues/32809
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
See also #33561
This PR:
- Use zero copy when buffering insert messages
- Make `storage.InsertCodec` support serialize multiple insert data
chunk into same batch binlog files
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
The data coordinator computed the appropriate number of import segments,
thus when importing in the data node, one can randomly select a segment.
issue: https://github.com/milvus-io/milvus/issues/33604
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Related to #27675
Store pk to minimal timestamp in `inData` instead of bloom filter to
check whether some delete entry hit current insert batch
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #32995
To speed up the construction and querying of Bloom filters, we chose a
blocked Bloom filter instead of a basic Bloom filter implementation.
WARN: This PR is compatible with old version bf impl, but if fall back
to old milvus version, it may causes bloom filter deserialize failed.
In single Bloom filter test cases with a capacity of 1,000,000 and a
false positive rate (FPR) of 0.001, the blocked Bloom filter is 5 times
faster than the basic Bloom filter in both querying and construction, at
the cost of a 30% increase in memory usage.
- Block BF construct time {"time": "54.128131ms"}
- Block BF size {"size": 3021578}
- Block BF Test cost {"time": "55.407352ms"}
- Basic BF construct time {"time": "210.262183ms"}
- Basic BF size {"size": 2396308}
- Basic BF Test cost {"time": "192.596229ms"}
In multi Bloom filter test cases with a capacity of 100,000, an FPR of
0.001, and 100 Bloom filters, we reuse the primary key locations for all
Bloom filters to avoid repeated hash computations. As a result, the
blocked Bloom filter is also 5 times faster than the basic Bloom filter
in querying.
- Block BF TestLocation cost {"time": "529.97183ms"}
- Basic BF TestLocation cost {"time": "3.197430181s"}
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #32642
`LocationCache` used map to store different locations for different K
which may cause lots of CPU time when get locations many times.
This PR change the implementation of LocationCache to store only the
location for the largest K used to totally remove the map access
operation.
See pprof from test of @XuanYang-cn
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #32165
There were some frequent scan in metacache:
- List all segments whose start positions not synced
- List compacted segments
Those scan shall cause lots of CPU time when flushed segment number is
large meanwhile `Flushed` segments can be skipped in those two scenarios
This PR make:
- Add segment state shortcut in metacache
- List start positions state before `Flushed`
- Make compacted segments state to be `Dropped` and use `Dropped` state
while scanning them
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #33247
Introduced in PR #32865
Remove task after task done to keep checkpoint sound and safe
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #33266
Each `WriteBuffer` shall have same channel/collection id attribute, so
use same logger will do and reduce logger allocation & frequent name
composition
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Query slot of compaction in datanode, and transfer the control logic for
limiting compaction tasks from datacoord to the datanode.
issue: https://github.com/milvus-io/milvus/issues/32809
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
To decouple compaction from shard, loading BF from storage instead of
memory during L0 compaction in datanode.
issue: https://github.com/milvus-io/milvus/issues/32809
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Avoid passing datanode around preparing datanode code directory
refactory.
Also refine unit test code for same component. The `Await` shall return
first before checking the counter number since when lock cost is heavy
(using deadlock.RWMutex See PR #33069.) case may fail due to long
running time submitting tasks.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #33005
1. add `MemorySize` field for insert binlog.
2. `LogSize` means the file size in the storage object.
3. `MemorySize` means the size of the data in the memory.
---------
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
Signed-off-by: cai.zhang <cai.zhang@zilliz.com>
See also #32642
This PR reuses hash locations for bloom filter prediction utilizing
`storage.Location`, like enhancement #32642.
Also adds a utility struct in storage: `LocationCache` to storage
locations for variable K (numbers of hash functions)
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #32860
SyncMgr did not ensure task key is locked before `SyncData` returning
which may cause concurrent problem during sync wich multiple policies.
This PR change sync mgr implementation to make sure the key is locked
before returning task result `*conc.Future`
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #31516
background: the server id field in data node is redundant. session id
already provides the source of truth.
Signed-off-by: yiwangdr <yiwangdr@gmail.com>
Related to #27675
Use `struct{}` instead `error` for sync task future result type to
reduce result size and preventing logci error.
Also change some unused parameter to `_` to suppress lint warning
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #29419
added helper functions to parse JSON representation of sparse float
vectors, will be used by both the restful server and the import utils.
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
See also #32403
`fg_buffer_size` was decreased after metrics removed in flowgraph
ddnode, which make metrics value negative.
This PR move remove metrics logic into `dataSyncService.Close`
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #27675#26177
Make memory check evict memory buffer until memory water level is safe.
Also make `EvictBuffer` wait until sync task done.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
